Results 1 to 2 of 2

Thread: Two-stroke crank seals?

  1. #1
    Join Date
    3rd May 2010 - 18:46
    Bike
    ZX14R, KX500E16, CR500R
    Location
    Westbridge
    Posts
    878

    Two-stroke crank seals?

    How long will crank seals last if the Bike's only been started every 12 weeks , run for about 6 minutes then, put away again for another 3 months or so ?. And repeat the above.

    And how long should I run it for when I've started it to keep some pressure in the crankcase, or is about 6 minutes enough ?

    Bike's a low hour, CR500 01 , don't want to ride it because of it's A1 condition but also don't want to have to strip the motor and replace the seals .


    Cheers

  2. #2
    Join Date
    15th February 2005 - 15:34
    Bike
    Katanasaurus Rex
    Location
    The Gates of Delirium
    Posts
    9,015
    Quote Originally Posted by Stylo View Post
    Bike's a very low hour, mint CR500 01 , don't want to ride it because of it's A1 condition but also don't want to have to strip the motor and replace the seals .
    It wouldn't be a major job to replace the seals if you ever had to.

    It's just a matter of removing the rotor and stator from the left side and the clutch cover and primary gear from the right side.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •