Page 2 of 2 FirstFirst 12
Results 16 to 26 of 26

Thread: Custom Components Ltd - CNC for buckets

  1. #16
    Join Date
    26th June 2005 - 21:11
    Bike
    Honda NSR300 track hack
    Location
    Pukerua Bay
    Posts
    4,092
    Quote Originally Posted by cotswold View Post
    Hi Glenn,
    This was on a bike I bought and is pretty but buggered, so could you make a new 1/2 for it and if so could you PM me with an idea of cost involved ?
    Hey,

    It's hard to give a cost without a bit more info. If you are keen, email me a couple more pictures with a ruler or tape measure in the photo (for scale) and I will be happy to help.

    Customcomponentsltd@gmail.com

    Cheers,

    -Glen


  2. #17
    Join Date
    4th February 2005 - 07:32
    Bike
    Rattlecan blue
    Location
    Auckland
    Posts
    3,963
    Tim, this is for the American pig bike?
    Stock is best

  3. #18
    Join Date
    1st March 2011 - 19:15
    Bike
    1996 Buell S1
    Location
    Orewa
    Posts
    1,017
    Quote Originally Posted by Henk View Post
    Tim, this is for the American pig bike?
    Yes it is, it was the best bit on the bike, a nice 6 pot Harrison Billet stopper but it's buggered.

  4. #19
    Join Date
    1st March 2011 - 19:15
    Bike
    1996 Buell S1
    Location
    Orewa
    Posts
    1,017
    Quote Originally Posted by Sketchy_Racer View Post
    Hey,

    It's hard to give a cost without a bit more info. If you are keen, email me a couple more pictures with a ruler or tape measure in the photo (for scale) and I will be happy to help.

    Customcomponentsltd@gmail.com

    Cheers,

    -Glen
    I'll take it apart and do that.

  5. #20
    Join Date
    13th April 2005 - 12:00
    Bike
    Enfield cr250r
    Location
    Tokyo
    Posts
    3,430
    Blog Entries
    4
    Actually , what is better a cad file or a rapid proto model ,(sorry I did look at nc programming but .....was distracted by the internet !)

    Stephen

    Have one non urgent for you !
    "Look, Madame, where we live, look how we live ... look at the life we have...The Republic has forgotten us."

  6. #21
    Join Date
    26th June 2005 - 21:11
    Bike
    Honda NSR300 track hack
    Location
    Pukerua Bay
    Posts
    4,092
    Quote Originally Posted by Brian d marge View Post
    Actually , what is better a cad file or a rapid proto model ,(sorry I did look at nc programming but .....was distracted by the internet !)

    Stephen

    Have one non urgent for you !
    Hi Stephen,

    The best file for me is a .sidprt (solidworks) file or next best is a .xt (parasoild) But generally I can work with most file types.

    Cheers,

    -Glen


  7. #22
    Join Date
    13th April 2005 - 12:00
    Bike
    Enfield cr250r
    Location
    Tokyo
    Posts
    3,430
    Blog Entries
    4
    Quote Originally Posted by Sketchy_Racer View Post
    Hi Stephen,

    The best file for me is a .sidprt (solidworks) file or next best is a .xt (parasoild) But generally I can work with most file types.

    Cheers,

    -Glen
    why does windoze always come back and kick me in te nuts ,,,,ive been a good boy honest I have


    One assumes iges and stl are ok, STEP?

    how about a 3d printed object , I often modify 3d printed parts its better '( for me ) if I sent the 3d part ,,,I wouldnt have to change the cad file .....( I know sorry )

    anyway when I get back to work Ill flick over a few thing if that is ok


    Stephen
    "Look, Madame, where we live, look how we live ... look at the life we have...The Republic has forgotten us."

  8. #23
    Join Date
    26th June 2005 - 21:11
    Bike
    Honda NSR300 track hack
    Location
    Pukerua Bay
    Posts
    4,092
    Quote Originally Posted by Brian d marge View Post
    why does windoze always come back and kick me in te nuts ,,,,ive been a good boy honest I have


    One assumes iges and stl are ok, STEP?

    how about a 3d printed object , I often modify 3d printed parts its better '( for me ) if I sent the 3d part ,,,I wouldnt have to change the cad file .....( I know sorry )

    anyway when I get back to work Ill flick over a few thing if that is ok


    Stephen
    Iges, step and STL are all fine, but just send through what is easiest for you first and I'll see if it works out ok at my end. I am using Solidworks 2010 for what it is worth.

    Cheers,

    -Glen


  9. #24
    Join Date
    13th April 2005 - 12:00
    Bike
    Enfield cr250r
    Location
    Tokyo
    Posts
    3,430
    Blog Entries
    4
    Quote Originally Posted by Sketchy_Racer View Post
    Iges, step and STL are all fine, but just send through what is easiest for you first and I'll see if it works out ok at my end. I am using Solidworks 2010 for what it is worth.

    Cheers,

    -Glen
    Might have it on a virtual machine ..2 10 , 2 12 , but if feel so dirty and unclean logging into ,,,,,, the company who we will not name ....
    "Look, Madame, where we live, look how we live ... look at the life we have...The Republic has forgotten us."

  10. #25
    Join Date
    26th June 2005 - 21:11
    Bike
    Honda NSR300 track hack
    Location
    Pukerua Bay
    Posts
    4,092

    CC Racing

    Well, not technically CNC, but the dyno is in the Custom Components workshop so I thought I would put these videos in here for those interested.

    These are a couple of videos of our latest build..





    Click image for larger version. 

Name:	first test runs.jpg 
Views:	36 
Size:	137.4 KB 
ID:	294523

    Cheers,

    -Sketchy


  11. #26
    Join Date
    31st July 2005 - 11:15
    Bike
    a shed full of crazy shit
    Location
    Palmerston North
    Posts
    2,201
    Looking bloody good sketchy..

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •