hi people. Im looking to upgrade the rear shocks on my 2002 gsx1400, has anyone done this and what brand did you go for, price etc
thanks
hi people. Im looking to upgrade the rear shocks on my 2002 gsx1400, has anyone done this and what brand did you go for, price etc
thanks
Hi guys
Im looking to upgrade my rear shocks on the 2002 gsx1400, anyone know the best place to get twin shock upgrades.
thanks
To elaborate the stock GSX1400 shocks are certainly not the worst performing set of oem twin shocks, by any means. Because of that its very possible to buy low cost aftermarket shocks for these that perform appreciably worse than stock. This is very much a case of ''let the buyer beware''
well basically one of the shocks is leaking oil from it so I thought maybe an upgrade would be best. This is a daily commuter so safety is important but don't want spend large amounts as it not my only toy. I assume these oem shocks are repairable?
Yes indeed they are, providing the shafts are not worn or rust pitted in the seal sweep area they can be repaired at reasonable cost. Unless you are prepared to spend $1400 or upwards on a set of twin shocks that will actually provide improved control and compliance rebuild is your best option.
As the proud owner of 5 of these great steeds over the years;
The later model shocks were more reliable and better damped (red springs) than the silver springed version (pretty sure its wasn't just the paint colour check ebay for these remembering buying overseas and or s/h is always a bit of a lottery.
Obviously the after market shocks are many and varied but if you going in that direction I would speak to just one man Rob Taylor from KSS
A lot of guys in the UK grab the rear shocks from a wrecked Yamaha XJR1300 for their GSX1400 rear end upgrade. Obviously the Ohlins on the back of the XJRs come in various configurations depending on the year and market the bike was sold in. The best models were the units with 'tool free' rebound, pre load and damping adjustability, they also have +- 10mm ride height adjustment built in.
There was an XJR being parted at 'Bike busters' in Ngaruawahia a while ago, could check there.
Yes that would work. They are a touch shorter though. Absolutely do not purchase the Japanese domestic market ''badge engineered'' Ohlins shocks that actually are not true Ohlins shocks. They were never intended for export out of Japan, then along came the free market. These ones have 12.5mm shafts and some 14mm, the springs are bigger diameter than the genuine product made in Sweden. Also the internal valving is very weak for the 50kg kamikazes riding them and the chrome on the shafts pits easily, rendering them as right offs.
The genuine Swedish shocks have 12,0mm shafts but also 14mm in the adjustable type.
With the genuine Swedish shocks on the main cylinder head casting will be stamped or laser etched a YA prefix followed by a 4 number suffix. Not to be confused with a batch code stamping on the opposite side. On receipt of that spec number we can tell you exactly what the shocks are and whats inside them. A reseller that has sincerity will be able to provide you such a spec number if they are genuine Swedish.
We offer a complimentary service to verify.
Alternatively we can offer new purpose built Ohlins shocks at a good price. PM me re that as there are people on here with a dutch auction mentality, I believe in a fair price for all parties with old world backup and recirculating the turnover back into the local economy.
Have the below type Ohlins on all 4 of my Twin shock bikes .... one is the earlier sort after type with the sand cast heads & the other is the billet CNC type ... Both excellent improvement over stock
SENSEI PERFORMANCE TUNING
" QUICKER THAN YOU SLOWER THAN ME "
Brother there's nothing wrong with the standard shocks except the oil leak you now have.I had the same issue, lucky for me there was a simple fix.
Go to the "gsx1400.org" and search "shock fix" for a detailed explanation on the how to and the why.If it works for you then yahoo if not then you are still in the same boat.For anything 1400 related this site has it all,helpful friendly fellas too.Also check out the MCN settings they recommend for your suspension.Hope all goes well.
This would be the go, or the 'ORG' fix then the 05 (?) onwards red spring type - i would still try the max to min range on the pre load on the red spring if kms cant be verified.
Earlier this year a friend of mine bought a wrecked XJR that had Yoshi shocks which included ride height adjustment, he hadnt noticed them but i did and let my other mate know with his 02 turbo that had worn shocks, i knew they would fit (straight swap) so they did a deal and swap.
I never new Yoshimura made twin shocks.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks