Hi everybody. I have just fitted a C model engine to my A model ZXR. Everything is exactly the same. It bolts straight in and the plugs plug straight into the original ones. It now has alot more low down torque and has lost 1000rpm at 100km/hr.
Scooter boy
Hi everybody. I have just fitted a C model engine to my A model ZXR. Everything is exactly the same. It bolts straight in and the plugs plug straight into the original ones. It now has alot more low down torque and has lost 1000rpm at 100km/hr.
L-Plate Rider
hey are the fairings the same cause i have a 250a and want the fairing from a 250c to put onto mine
For whom the bell tolls
it can be done, but it involves changing the front mount over (to accomodate diff light setup) and also may be difficult as the pipes are different. I have a set of pipes for the C model which are of no use to me... i paid $30 for them so thats how much they'll sell for.
Otherwise you may run into problems fitting fairings/seat to the A model tank, and the C fairings to the rear sub-frame of the A. The C model tank uses a different setup to hold it on but im sure you could do something about it if you really wanted to.
KiwiBitcher
where opinion holds more weight than fact.
It's better to not pass and know that you could have than to pass and find out that you can't. Wait for the straight.
Scooter boy
The fairings are slighly different. They mount up the same but are dirrerent lines. The major difference is the tank where the ram cooling tubes go in.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks