Help! On neutral, revs going up like crazy?

**zy53** · 9th January 2014, 20:44

I got a ninja 250 and fall over to left side. Now when i start the bike on netrual, the Rev is going up to like 7k even i'm not touching the throttle. It is still going up when I switch to gear 1...

Any idea what has been damaged? and how much it might cost to repair?

Cheers!

**zy53** · 9th January 2014, 20:46

The rev is okay when I manually control it and drive on the road....

but it is so scary when rev going up to 7k on netrual automatically.

**Crasherfromwayback** · 9th January 2014, 20:48

Originally Posted by zy53

I got a ninja 250 and fall over to left side. Now when i start the bike on netrual, the Rev is going up to like 7k even i'm not touching the throttle. It is still going up when I switch to gear 1...

Any idea what has been damaged? and how much it might cost to repair?

Cheers!

You sure it didn't fall on to the right (throttle side) and bend the handle bar tube hence jamming the throttle on?

Is it a carbed version? If it is and has fallen on to it's left side...has the choke cable been pulled out of the housing?

**zy53** · 9th January 2014, 21:14

Originally Posted by Crasherfromwayback

You sure it didn't fall on to the right (throttle side) and bend the handle bar tube hence jamming the throttle on?

Is it a carbed version? If it is and has fallen on to it's left side...has the choke cable been pulled out of the housing?

Yes it is carbed, and it has fallen on the left side. Not too sure about choke cable but it looks fine to me.

However the gear changer on the left footer has been pushed inside a bit because of the fall and there were little oil on the ground when I fall. But it doesn't leak anymore when I park standstill.

**zy53** · 9th January 2014, 21:15

Originally Posted by Crasherfromwayback

You sure it didn't fall on to the right (throttle side) and bend the handle bar tube hence jamming the throttle on?

Is it a carbed version? If it is and has fallen on to it's left side...has the choke cable been pulled out of the housing?

How do I check choke cable though

**zy53** · 9th January 2014, 21:23

Originally Posted by Crasherfromwayback

You sure it didn't fall on to the right (throttle side) and bend the handle bar tube hence jamming the throttle on?

Is it a carbed version? If it is and has fallen on to it's left side...has the choke cable been pulled out of the housing?

You are right.. somehow I let the choke on, damn that was the reason.

Thanks a lot!