Team Shnanny (Gary Cunningham, Dave Manuel)
Diprose and Son (Dave and Nathaniel) *Favourites?
Team ESE (2 Stroke - Avalon or another?)
Team ESE (4 Stroke - Glen Orwin)
Kel
Nigel 'no mates' Duff
The 3 Dicks and Dave! (Richban, Rich M-B, Rich E, Dave Trustrum)
Adlam and Son
Fordie and/or the Henkster (Rick52, Henk)
Team GPR
A South Island Surprise?
Other - please elaborate!
Well. After yesterdays efforts I think I will go to the team with the spare motor. As mine had a little hiccup on the GPR dyno. She was going good with Scotts carb. Making 5 more HP at 7 or 8 and just shy of 27 with only a couple of runs. Then somthing when clunk and that was that. I will pull it apart today to try find the problem. Bugger.
And the 300 was looking good till it stopped making power at 60hp. The ecu and loom are stopping it from doing what it can. The loom had been messed with from the previous owner so I will wait till the igntech arrives and that will fix that problem. But the potential is there.
BAN150: we were very impressed how well it ran up with Scott's FCR (until the clunk clunk clunk tap ta tap).. now get to shed and retrieve that nut that fell down the hole....
BAN300: Ran up great to 8800rpm then smacked into a wall; looking over the "other 300 dyno runs" it was performing real well (+2%). look forward to seeing the Igntech on it (80hp is the goal)...
A big thankyou to mike, as we have a motor together for tomorrow and the gp team shnanny is all set for tokoroa.
Talk about last minute. Barrel needs honing and I have 2 bent valves, The piston not to flash but will do. More squish needed for 13000rpm and heavy forged piston.
Could have been another oil slick. Not a good look for sure.
On that note anyone sean with a nylon bung where there started used to be should fail Scrutineering. On a nylon bung holding crank case presure in any engine.
Just saying. $1.50 frost plug will never come out.
Rich, you pay a lot less for your frost plugs than I did, I have got a couple of spares though if we decide someone needs a replacement. I'll probably try to gouge them on price though![]()
Stock is best
Good to hear you're back in action.
Don't you look at my accountant.
He's the only one I've got.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks