mb100 and mb50 parts

**nsrpaul** · 2nd September 2005, 20:44

want anything for either a mb/h 100 or a mb50 , including complete motor for the 100 and two 50 motors with no gearbox , rolling chassis , bucket racers , this would suit you

**R6_kid:Me** · 2nd September 2005, 21:18

im looking for a bucket engine... was aiming for a gl145 but i've seen a few mb100's around, how much you want for the mb100 engine?

**nsrpaul** · 2nd September 2005, 21:25

its all together except flywheel and coils , can provide wiring loom(striped back , only good for bucket) coil carb etc if needed , has had some porting , nothing radical , can provide specs if you want , was assembled with new rings but piston had some marks but nothing serious , still good
tell me what ya want , eg if bare motor only and make an offer

**R6_kid:Me** · 2nd September 2005, 21:44

well i really only need the engine and carbs and relevant electrics... Not really sure what its worth so you'll have to tell me what you reckon you'd want for such a setup. I assume the coils and flywheel will come with it...

**Ivan** · 3rd September 2005, 12:37

Originally Posted by nsrpaul

want anything for either a mb/h 100 or a mb50 , including complete motor for the 100 and two 50 motors with no gearbox , rolling chassis , bucket racers , this would suit you

Wat do you mean bucket racers ill have them for free

**nsrpaul** · 3rd September 2005, 15:14

$165 for motor , carb( not original , 24mm ) and electrics( flywheel and stator coils ) partly dismantled ( flywheel and coils off )
$25 for ignition coil and cdi
both items + freight , think I have some spare flywheels etc that will go in the box 2
email rottenoldpaul@hotmail.com