XV1000 piston & crank sizing?

[Seraph]

Hey people!

got a little project on the go and desperately need to know some dimensions
So if anyone has an xv1000 in bits (or has worn out crank and piston to measure up) thatd be most helpful..

I need to know the wrist pin diameter, piston compression height, bigend journal diameter ,bigend rod diametre without shells and finally rod width at bigend.



Thanks

[Grumph]

Hey people!

got a little project on the go and desperately need to know some dimensions
So if anyone has an xv1000 in bits (or has worn out crank and piston to measure up) thatd be most helpful..

I need to know the wrist pin diameter, piston compression height, bigend journal diameter ,bigend rod diametre without shells and finally rod width at bigend.



Thanks

If you're doing a special build, i've got a spare pair of Manley rods which are stronger and lighter than stock - and the crank just has to have a light grind to suit small journal chev bearings....I can do the measurements you want but it's too cold to go out to the workshop at present.....