Need parts for a Kawasaki ZRX400

[Merlin.pgd]

Hi, I'm looking for some parts for a 95 ZRX400, Petrol tank, shocks, disc brakes & controls. Please let me know if you have any of the parts and what you want for it. Thanks

[ducatilover]

Same discs on the front as a ZZR4/6, which means a million things fit
Shocks, probably best off going aftermarket
Controls will be either ZZR or ZR/Zephyr

[Merlin.pgd]

Same discs on the front as a ZZR4/6, which means a million things fit
Shocks, probably best off going aftermarket
Controls will be either ZZR or ZR/Zephyr

Thanks mate. Would you know if the rear disc is same as ZZR4/6? Cheers

[ducatilover]

Thanks mate. Would you know if the rear disc is same as ZZR4/6? Cheers

Can ya take a pic? and measure the mounting holes.
I think the rim is the same as the old ZX4.

[Merlin.pgd]

Can ya take a pic? and measure the mounting holes.
I think the rim is the same as the old ZX4.

What a mission to take the rear wheel off mate! Drove all over Auckland to find some Allen key 12 mm and over

Finally found a rear disc on Ebay for $90 including shipping, but trying to see if I can find some cheaper discs for front.

[ducatilover]

I'd suggest spending the coin on some decent discs is worth while if you're keeping the bike. Plus those wave discs look like sex.

[Merlin.pgd]

I'd suggest spending the coin on some decent discs is worth while if you're keeping the bike. Plus those wave discs look like sex.

Absolutely correct man! I am stuck between these discs and I'm painting the bike and the wheels black not sure which one is the right choice, maybe the gold discs.

[ducatilover]

They both look good, but you can't go wrong with black

[Merlin.pgd]

They both look good, but you can't go wrong with black

After all this wait the rear disc I purchased was for the different model!

I have the correct dimensions finally.

Outside diameter 240 mm
Inside diameter 100 mm
Bolt hole circumference 120 mm
Bolt hole size 10.5 mm
Bolt hole quantity 5
Thickness 6 mm
Minimal thickness 5 or 5.5 mm

Hard to find

[ducatilover]

After all this wait the rear disc I purchased was for the different model!

I have the correct dimensions finally.

Outside diameter 240 mm
Inside diameter 100 mm
Bolt hole circumference 120 mm
Bolt hole size 10.5 mm
Bolt hole quantity 5
Thickness 6 mm
Minimal thickness 5 or 5.5 mm

Hard to find

I'll measure some of mine when I'm in the workshop next

[Merlin.pgd]

I'll measure some of mine when I'm in the workshop next

Thanks a lot for that mate!

[Merlin.pgd]

I'll measure some of mine when I'm in the workshop next

Finally found a photo of the disc mate.