1982 XL250R head

**fatty35** · 2nd November 2015, 14:11

Hi All,

So Iv started doing the top end an as it turns out the head is done. I know its a long shot but is there anyone out there with one in good condition that could work?

Thanks in advance

**Muzz67** · 3rd November 2015, 16:27

give me a ring. Muzz.

**Muzz67** · 4th November 2015, 16:07

not perfect but you're welcome to come and have a look.

**fatty35** · 4th November 2015, 16:47

Originally Posted by Muzz67

not perfect but you're welcome to come and have a look.

Hi Muzz, Thanks for that. Iv taken some pictures of the 2x iv got currently. Do you think yours are in better condition?

Cheers

Adam

Click image for larger version.

Name: GEDC0016.jpg
Views: 24
Size: 819.8 KB
ID: 317078

Click image for larger version.

Name: GEDC0015.jpg
Views: 24
Size: 956.5 KB
ID: 317077

Click image for larger version.

Name: GEDC0014.jpg
Views: 26
Size: 865.7 KB
ID: 317076

Click image for larger version.

Name: GEDC0017.jpg
Views: 23
Size: 922.1 KB
ID: 317079

**Muzz67** · 4th November 2015, 20:18

Both also got small cracks. both come off good running motors.

**fatty35** · 6th November 2015, 07:54

Originally Posted by Muzz67

Both also got small cracks. both come off good running motors.

Hi Muzz, Cheers for having a look for me. I just purchased one on trademe which looks to be in good condition so hopefully I can get the bike back on the road soon ready for summer.

**Muzz67** · 6th November 2015, 19:16

yell out if you need a hand.

**rudolph** · 8th November 2015, 20:26

If you get relay stuck you can get them repaired, my 83 XL250 had a crack from the exhaust valve seat to the sparkplug hole so deep it went right through to under the cam