Montesa moto x or enduro bike parts 250cc or bigger required

[monty414]

Greetings, I have 250 and 360 montesa enduro projects and a 414 moto x project under way.
any parts or bikes out there that could be doners or future projects will be considered. I've owned montesa's for the last 20 years and have resurrected about 10 to working order over this time. Cheers

[pete-blen]

what year is the enduro .... H6?

[monty414]

250 is an H6 with the orange frame/white tank. 360 is H6 red tank black frame 1978, 414 is VF model orange frame yellow tank. I see you have or had a 125H6? I have 2 spare front guards and 1 and a half sets of side covers, an ignition and a kick starter for that bike if you ever need them. 250 endure needs airbox side covers, side stand and various other bits. Hope to get it together for Kinleith Vinduro in may. 360 needs heaps including an engine.

[pete-blen]

still got the 125 H6... red frame / white tank
and a 77 348 Cota MRR... I also need a air box for...

spent a while trying to track down a 250 H6 that was sold new
by the same guy I got the 125 H6 from... trail run dead once his
contracting biz went belly up he legged it to OZ owning $...

PS.... the 414 must be one of the last real Montesa's before Honda
got there foot in the door....

Pete

[monty414]

VF was followed by VG model then it pretty much turned to custard, think there was a couple of watercooled 250 prototypes then it went to Honda. Does your 348 have the triangle shape on the end of the gear change where you shift with your boot?

[pete-blen]

Don't know... Can't remember
have to have a look next time I'm back in Blenheim....
think it's got a round rubber end..

[monty414]

I have one off a trials bjke that looks like that. brand new but of no use to me.