Pgm 2000 v8

[Bassai]

Has anyone seen this?

http://pgmv8.com.au/





I was having an orgasm just looking at it!

ENGINE

Configuration: 90 degree V8
Capacity: 1996cc
Bore/stroke: 77 x 54mm
Compression ratio: 13:1
Cylinder Head: DOHC, five valves per cylinder
Cooling: Liquid
Fuelling: 8 x 45mm Mikuni Drive-By-Wire throttle bodies
Engine Management: Motec M130 ECU and software.
Power: 334HP@ 12,800rpm (At the countershaft sprocket)
Torque: 214Nm @ 9,500rpm (At the countershaft sprocket)
Exhaust: 2 x 4-2-1 titanium
Weight: 242kgs wet with fuel, water and lubricants


Hi _____,

Thanks very much for your interest in the PGM V8.

The bikes are handmade, to order, with a current price of USD$180K.

This price includes air freight to an airport of your choice, and what essentially amounts to a life time warranty.

You will always be dealing directly with us, The Manufacturer, and because of its specialised, low volume nature, many components can to be altered to suit the customer.

However, while we will provide every possible support, all import duties, customs fees and paperwork are the responsibility of the purchaser.

There is a delivery time of approx 10 months but we are working to reduce this time.

Kind regards

Paul G Maloney

info@pgmv8.com.au

[HondaLad]

Almost seems a crime that it's so docile and refined...

http://www.goodbikers.net/2016/01/pgm-v8-review.html

[actungbaby]

Has anyone seen this?

http://pgmv8.com.au/





I was having an orgasm just looking at it!

ENGINE

Configuration: 90 degree V8
Capacity: 1996cc
Bore/stroke: 77 x 54mm
Compression ratio: 13:1
Cylinder Head: DOHC, five valves per cylinder
Cooling: Liquid
Fuelling: 8 x 45mm Mikuni Drive-By-Wire throttle bodies
Engine Management: Motec M130 ECU and software.
Power: 334HP@ 12,800rpm (At the countershaft sprocket)
Torque: 214Nm @ 9,500rpm (At the countershaft sprocket)
Exhaust: 2 x 4-2-1 titanium
Weight: 242kgs wet with fuel, water and lubricants


Hi _____,

Thanks very much for your interest in the PGM V8.

The bikes are handmade, to order, with a current price of USD$180K.

This price includes air freight to an airport of your choice, and what essentially amounts to a life time warranty.

You will always be dealing directly with us, The Manufacturer, and because of its specialised, low volume nature, many components can to be altered to suit the customer.

However, while we will provide every possible support, all import duties, customs fees and paperwork are the responsibility of the purchaser.

There is a delivery time of approx 10 months but we are working to reduce this time.

Kind regards

Paul G Maloney

info@pgmv8.com.au

am patrick malone can i say where related somehow oh please can i trow leg over cuz Paul ps you speel you surname wrong.
how ironic me saying that.