Results 1 to 3 of 3

Thread: 1999 Honda CR250 - Enduro

  1. #1
    Join Date
    21st February 2012 - 08:25
    Bike
    1999 Honda CR250
    Location
    Christchurch
    Posts
    18

    1999 Honda CR250 - Enduro

    Grab a deal before I list the bike on Trade Me.

    I’ve owned this bike for approximately 6 years. It’s been a great bike to ride and own, and it’s never let me down. I’ve put 70 trouble free hours on the bike since I’ve owned it. The bike is in great condition mechanically, the plastics are ok, with some scratches and cracks as usual with a bike this age.

    Very fast and very light, this bike is not for the faint-hearted. I clean the air filter after every ride, and replace the gearbox oil approx every 15 hours.

    I had the front and rear suspension rebuilt by Linton at Dirt Action Services along with the wheel bearings, swingarm bearings and suspension linkage bearings.

    I replaced the piston, rings, gudgeon pin and small end bearing at 58.8 hours, the bore was diamond honed at NZ Cylinders and the Nikasil coating checked. Crank and big end bearing were fine.

    I’ve modified or replaced a number of parts to make the bike more suitable for Enduro riding, see list below:

    · Brand new carburetor (complete assembly)
    · Dual stage Boysen reeds
    · Twin Air air filter
    · EBC wave front disc
    · Gripper seat cover
    · AMS foot pegs
    · Hyde skid plate
    · FMF Gnarly expansion pipe and pipe guard
    · FMF Shorty silencer (on it when purchased) have repacked it
    · Stealthy 8oz flywheel weight
    · Bark busters
    · Wossner piston, rings, small end bearing and gudgeon pin and clips
    · Swingarm and suspension linkage bearings replaced
    · Front and rear wheel bearings replaced
    · Front and rear sprockets and chain replaced
    · Plastic chain guides and rollers replaced
    · Near new front and rear tires (Goldentyre GT216 - Front, GT333 - Rear)

    Also comes with some spares, includes original carb, repaired stock expansion pipe, partially worn rear tyre and a new water pump bearing and seal kit.

    Only selling because I’ve bought a near new Husaberg!

    Click image for larger version. 

Name:	DSC_0047.jpg 
Views:	947 
Size:	918.4 KB 
ID:	327882

    Click image for larger version. 

Name:	DSC_0049.jpg 
Views:	63 
Size:	888.1 KB 
ID:	327883

    Click image for larger version. 

Name:	DSC_0053.jpg 
Views:	172 
Size:	940.9 KB 
ID:	327891

    Click image for larger version. 

Name:	DSC_0050.jpg 
Views:	306 
Size:	866.8 KB 
ID:	327884

    Click image for larger version. 

Name:	DSC_0054.jpg 
Views:	158 
Size:	902.8 KB 
ID:	327890

    Click image for larger version. 

Name:	DSC_0055.jpg 
Views:	96 
Size:	799.5 KB 
ID:	327887

  2. #2
    Join Date
    21st February 2012 - 08:25
    Bike
    1999 Honda CR250
    Location
    Christchurch
    Posts
    18
    Auction started on Trade Me. See link here https://goo.gl/LeIyQ7.

  3. #3
    Join Date
    21st February 2012 - 08:25
    Bike
    1999 Honda CR250
    Location
    Christchurch
    Posts
    18
    Bump, auction closes tomorrow evening!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •