Results 1 to 8 of 8

Thread: Te Puke

  1. #1
    Join Date
    4th February 2005 - 07:32
    Bike
    Rattlecan blue
    Location
    Auckland
    Posts
    3,963

    Te Puke

    After the successful conclusion of Round two at Taumarunui (at least I had a good time and by the sounds of it so did everybody else) We move on to Round three at Te Puke on the 11th 12th Feb. Unfortunately this clashes with the AMCC club day at Hampton Downs but there are only so many available dates in the calendar.
    We didn’t do any noise testing at Taumarunui but there were a couple of bikes that still seemed quite loud. I will be breaking out the sound meter at Te Puke and loud bikes that can’t be quietened down will have to be parked up as it was noise from another type of bike that lost us access. We have only been here twice before and if there are any complaints from neighbors at all regardless of the actual noise levels we won’t be back so if you haven’t been before this may be your only chance.
    The track is at 154 Alley Rd, Te Puke and it’s a gem, it runs up a valley with almost constant elevation changes so that like Tokoroa the google earth shot doesn’t do it justice, from the bottom of the old circuit to the top of the extension is all uphill and then strangely enough down as you come back again. The new part of the circuit is the part that looks like it’s been designed with a ruler but is a lot more flowing than first impressions would suggest.
    The club is going to open their kitchen for lunch Saturday and Sunday (I think) and is also going to open the bar on Saturday night.
    Prices the same as at the other NI rounds
    $40 entry
    $10 Transponder hire
    $40 Day license
    $10 transponder clip if you need one

    Hope to see you all there
    Henk
    Stock is best

  2. #2
    Join Date
    3rd April 2011 - 18:54
    Bike
    What day of the week?
    Location
    Levin
    Posts
    427
    I'm such a good boy. Sorry Henk, can't send me home this time. For noise on the track anyway
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20170129_130023-1.jpg 
Views:	36 
Size:	419.3 KB 
ID:	328227  

  3. #3
    Join Date
    2nd July 2013 - 11:52
    Bike
    GPR150
    Location
    palmertson north
    Posts
    2,389
    It's amazing how much packing blows out in a short timeClick image for larger version. 

Name:	20170117_131228.jpg 
Views:	44 
Size:	246.1 KB 
ID:	328234
    i'm over buckets

  4. #4
    Join Date
    2nd July 2013 - 11:52
    Bike
    GPR150
    Location
    palmertson north
    Posts
    2,389
    Quote Originally Posted by TALLIS View Post
    I'm such a good boy. Sorry Henk, can't send me home this time. For noise on the track anyway
    seems the chinese forget to put anything in the muffers
    i'm over buckets

  5. #5
    Join Date
    4th February 2005 - 07:32
    Bike
    Rattlecan blue
    Location
    Auckland
    Posts
    3,963
    Quote Originally Posted by mr bucketracer View Post
    seems the chinese forget to put anything in the muffers
    I repacked mine before Taumarunui and I must admit it didn't look much better than yours.

    Only a couple of weeks to go now.
    Stock is best

  6. #6
    Join Date
    4th February 2005 - 07:32
    Bike
    Rattlecan blue
    Location
    Auckland
    Posts
    3,963
    About a week to go now. Time to spend the long weekend re packing your muffler. Unless you are as proactive as Scott
    Stock is best

  7. #7
    Join Date
    4th February 2005 - 07:32
    Bike
    Rattlecan blue
    Location
    Auckland
    Posts
    3,963
    This weekend.
    Same deal as usual, if you beat me there and want to get access to the track give me call on 021 145 3090 and I'll pass on some contact details.
    Stock is best

  8. #8
    Join Date
    4th February 2005 - 07:32
    Bike
    Rattlecan blue
    Location
    Auckland
    Posts
    3,963
    That went reasonably well.
    Next away meeting is the GP in Tokoroa 11 12 March.

    IF YOU NEED A LICENCE UPGRADE GET ON TO IT AS SOON AS YOU CAN
    Stock is best

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •