I want to paint my radiator guard black.
All the high temp paint I have looked at requires curing in an oven. I do not have access to a suitable oven.
Do I need to use high temp paint?
Cheers
I want to paint my radiator guard black.
All the high temp paint I have looked at requires curing in an oven. I do not have access to a suitable oven.
Do I need to use high temp paint?
Cheers
a) meh
b) rattle can. stove black from bunnigs.
Auto paint and high temp paint will both have temp ranges that are acceptable on them.
From memory:
Exhaust black can cope up to 200 degrees.
The last auto paint I used was good to 75.
The last high temp was good to 1500 degrees.
Get a measurement, or a good guess, read the side of the can or tin and make your choice.
Real high temp stuff is aimed at iron parts, exhaust headers and engine blocks.
Sent from Tapatalk. DYAC
The guard is on the up wind side of the heat created by a radiator...the only heat it has to deal with is the ambient temps expelled by the radiator at a stand still so high temp paint isn't that important.
Plus its brittle paint unless cured properly on a secondary surface so it'll get arseholes from debris etc thrown up at it, you're better off with a high grade mag wheel paint that has some durability against knocks & chips
You can cure high temp paint quite successfully with a electric saint stripping gun - it takes a while but works fine.
But you won't need the fancy stuff for a radiator guard.
Fucking auto correct.
Paint stripping gun that was!
Your arse may need a guard if you are planning on hanging around the clergy.
Or sit in in front of your log burner. Bloody cold enough Summer so far to light one up ..
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks