Who can replace spokes in the Auckland or Whangarei areas? For a BMW.
Who can replace spokes in the Auckland or Whangarei areas? For a BMW.
"May all your traffic lights be green and none of your curves have oncoming semis in them." Rocky, American Biker.
"Those that give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." Benjamin Franklin, 18th C.
Which BMW model? If they're one of the special lace versions, very few will work on those wheels worldwide.
Originally Posted by Jane Omorogbe from UK MSN on the KTM990SM
Superlace or something, which makes them overly complicated and difficult to get right, to the point most don't touch them. Woodys Wheels in the USA are probably one of the best known, and can repair and work on BMW rims (along with selling their own solutions) with better accuracy than the factory.
I've seen the odd post of people replacing spokes and rebuilding, but you obviously need the right tools, truing the wheel etc.
Originally Posted by Jane Omorogbe from UK MSN on the KTM990SM
"May all your traffic lights be green and none of your curves have oncoming semis in them." Rocky, American Biker.
"Those that give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." Benjamin Franklin, 18th C.
Originally Posted by Jane Omorogbe from UK MSN on the KTM990SM
Meh, its a spoke. How hard can it be.
I did an engineering apprenticeship many moons ago. BMW spokes can't be any different to others. I mean, if the hub is centred and the spokes have the right torque/tension = no problem. Of course, saying that is easy, but doing it is something else. I once did a bicycle wheel; t'was nigh-on impossible - but it worked in the end.
"May all your traffic lights be green and none of your curves have oncoming semis in them." Rocky, American Biker.
"Those that give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." Benjamin Franklin, 18th C.
As a kid I spent some time in a bike shop learning from the owner. Bicycle wheels are pretty easy when you know the syste of 2 under 1 over, or whatever it is. Mountain biking is hard on wheels, so I'm also truing my and mates wheels, picking up on the loose spokes etc. Building a wheel from scratch is obviously more tricky as you have to watch for dishing and so on.
However, the BMW wheels, while using the same principles, are a fair bit more complicated. I'd probably give it a crack at some point if the opportunity and possession of tools arose (I have an R1200GSA), but definitely the one spoke at a time etc.
I'll ask around though...
Originally Posted by Jane Omorogbe from UK MSN on the KTM990SM
Originally Posted by Jane Omorogbe from UK MSN on the KTM990SM
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks