Honda 18mm Spark Plug Socket

[cods4]

Does anyone have a Honda 18mm spark plug socket for a Honda XR400 or XR650?
The PO installed different plugs in my Ducati that have a larger than normal 18mm hex and it sounds like the honda tool is the ideal one for the job. The Ducati tool is for a 16mm plug and therefore not much use.

I am going to install the standard 16mm plugs once I get these out so I dont want to go and buy a tool from Honda if I don't need to.

I can come and pick it up from almost anywhere in Auckland and will bring it back the same or next day.

[Hobbyhorse]

http://www.supercheapauto.co.nz/Prod...ve-18mm/219872

[cods4]

http://www.supercheapauto.co.nz/Prod...ve-18mm/219872

Thanks, but I already tried a deep socket from Repco but it didnt have a chance of fitting down the hole. I think it will need to be a thin wall spark plug wrench like this. http://www.ebay.com/itm/GENUINE-HOND...hUD33Z&vxp=mtr

[nzspokes]

Hold the phone, think I have one in the shed i made for my VTR. I will go see the size.

[nzspokes]

And confirmed. Its a repco socket I had spun down so very thin wall. I work by the airport and live out west if thats of any use.

[cods4]

And confirmed. Its a repco socket I had spun down so very thin wall. I work by the airport and live out west if thats of any use.

Awesome, thanks mate. I'm kinda west. Will pm you