Results 1 to 11 of 11

Thread: Agv k3 sv helmet fake?

  1. #1
    Join Date
    20th July 2017 - 14:29
    Bike
    2017 Yamaha r6
    Location
    Auckland
    Posts
    20

    Agv k3 sv helmet fake?

    I just bought an AGV k3 sv helmet from Moto1 (http://www.moto1.nz/) the helmet seems in good condition, but the rear doesn't show any DOT or ece ratings, this is what the rear of the helmet looks like:



    Is this fake or a real helmet?

  2. #2
    Join Date
    9th May 2008 - 21:23
    Bike
    A
    Location
    B
    Posts
    2,547
    The standards label will be inside, directly on the shell liner, under the padding. Just peel the cheek pads and/or crown liner out and it'll pop into view.

  3. #3
    Join Date
    20th July 2017 - 14:29
    Bike
    2017 Yamaha r6
    Location
    Auckland
    Posts
    20
    Quote Originally Posted by caspernz View Post
    The standards label will be inside, directly on the shell liner, under the padding. Just peel the cheek pads and/or crown liner out and it'll pop into view.
    I couldn't find anything, only these 2 stickers,


  4. #4
    Join Date
    9th May 2008 - 21:23
    Bike
    A
    Location
    B
    Posts
    2,547
    Looks ok to me. Must admit my latest Shoei has basically a brand label with lots of guff on it, along with an inspection label showing date of manufacture etc. Couple of my earlier helmets had an actual "Complies to AS whatever the number was" alongside the brand label.

    Have you asked the retailer?

  5. #5
    Join Date
    23rd October 2013 - 18:30
    Bike
    72 Kawasaki A7, 05 Kawasaki W650
    Location
    Tauranga
    Posts
    1,289
    On my Shoei the standards label is on the chinstrap, neatly tucked into the padding.

    The probability that a NZ retailer has supplied a fake is very very low, unless they're purchasing through dodgy third party overseas distributors.

  6. #6
    Join Date
    19th January 2013 - 16:56
    Bike
    a 400 and a 650 :-)
    Location
    The Isthmus
    Posts
    1,592
    Quote Originally Posted by caspernz View Post
    ...Have you asked the retailer?
    +1

    If you are concerned about the authenticity of the helmet, go back and chat to the retailer.

  7. #7
    Join Date
    9th May 2008 - 21:23
    Bike
    A
    Location
    B
    Posts
    2,547
    Quote Originally Posted by Mike.Gayner View Post
    On my Shoei the standards label is on the chinstrap, neatly tucked into the padding.

    The probability that a NZ retailer has supplied a fake is very very low, unless they're purchasing through dodgy third party overseas distributors.
    Thanks Mike, you know I just went and checked my latest Shoei? Yep, had to slide the chinstrap cover back and there was my standards label.

    Hope the OP has found his label in the same location...

  8. #8
    Join Date
    20th July 2017 - 14:29
    Bike
    2017 Yamaha r6
    Location
    Auckland
    Posts
    20
    Quote Originally Posted by caspernz View Post
    Thanks Mike, you know I just went and checked my latest Shoei? Yep, had to slide the cover back and there was my standards label.

    Hope the OP has found his label in the same location...
    Yup, haha thanks guys

  9. #9
    Join Date
    8th January 2005 - 15:05
    Bike
    Triumph Speed Triple
    Location
    New Plymouth
    Posts
    10,092
    Blog Entries
    1
    Worry not about the lack of a DOT label, that's a US thing and will normally only be found on a helmet purchased in the USA. My NZ sourced Arai doesn't have one, nor did any of my other helmets purchased here. My Arai ex USA does sport a DOT sticker.
    There is a grey blur, and a green blur. I try to stay on the grey one. - Joey Dunlop

  10. #10
    Join Date
    25th January 2006 - 19:13
    Bike
    moped
    Location
    Kapiti Coast
    Posts
    611
    Just remember that a Helmet with just DOT certified is not acceptable for Racing here in NZ now.

  11. #11
    Join Date
    9th January 2007 - 12:27
    Bike
    08 CBR600RR
    Location
    Auckland
    Posts
    106
    ECE label is the chinstrap normally the one with circled e logo

    Something like this
    https://billyscrashhelmets.co.uk/wp-...lmet-label.jpg

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •