Page 9 of 9 FirstFirst ... 789
Results 121 to 126 of 126

Thread: 1987 Suzuki Impulse GSX 400 X GK71E Restoration

  1. #121
    Join Date
    13th June 2010 - 17:47
    Bike
    Exercycle
    Location
    Out in the cold
    Posts
    5,125
    Hadn't looked at this for yonks. the pics of your wheels (nice...) brought back memories. Years back I got asked to participate in an evening for the BEARS club guys. Idea was to bring them up to date with new rules for scrutineering purposes. A couple of the example bikes there had impulse wheels fitted. Well, they were easily available 17's...and cheap.
    I pointed out that they had wheel bearings on close centers - which on heavy bikes meant they cut out quite quickly.
    One of the bikes there was already a fail with discernable play. An eye opener for some of them.

  2. #122
    Join Date
    5th April 2004 - 20:04
    Bike
    Exxon Valdez
    Location
    wellington
    Posts
    13,326
    Quote Originally Posted by Grumph View Post
    I pointed out that they had wheel bearings on close centers - which on heavy bikes meant they cut out quite quickly.
    One of the bikes there was already a fail with discernable play. An eye opener for some of them.
    Is there enough meat left to pack the bearings out?
    Last edited by onearmedbandit; 27th May 2021 at 19:56.

  3. #123
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    10,709
    Quote Originally Posted by Drew View Post
    Is there enough meat left to pack the bearings out?
    The wheel bearings are ball-bearing drew.......How do you pack them out?

    Quote Originally Posted by Grumph View Post
    Hadn't looked at this for yonks. the pics of your wheels (nice...) brought back memories. Years back I got asked to participate in an evening for the BEARS club guys. Idea was to bring them up to date with new rules for scrutineering purposes. A couple of the example bikes there had impulse wheels fitted. Well, they were easily available 17's...and cheap.
    I pointed out that they had wheel bearings on close centers - which on heavy bikes meant they cut out quite quickly.
    One of the bikes there was already a fail with discernable play. An eye opener for some of them.
    Funny i was thinking of that same story you had said before when i seen the impulse.
    Mid 90's Yamahas had tiny bearings and axels i have no idea why they had so small axels then as they made them smaller from the 70-80's 15mm on a FZR1000 or FJ1100 wtf
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

  4. #124
    Join Date
    13th June 2010 - 17:47
    Bike
    Exercycle
    Location
    Out in the cold
    Posts
    5,125
    Quote Originally Posted by Drew View Post
    Is there enough meat left to pack the bearings out?
    Look at the pics. They finish up flush with the outer surface of the housings.
    Last time I went to a BEARS meeting I think there were still a couple of Nortons using Impulse wheels.

  5. #125
    Join Date
    20th September 2008 - 12:50
    Bike
    1981 Yamaha RD350LC,Ducati M900/RD race
    Location
    Havelock North
    Posts
    1,624
    Quote Originally Posted by Grumph View Post
    Look at the pics. They finish up flush with the outer surface of the housings.
    Last time I went to a BEARS meeting I think there were still a couple of Nortons using Impulse wheels.
    They are a easy retro fit to FXR150 for bucket racing too, fit 125 slicks.
    Dale Kerrigan: If there's anything Dad loved more than serenity, it was a big two stroke engine on full throttle!

  6. #126
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street Triple R/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    18,498
    But they are somewhat boat anchor heavy. Like really heavy.
    I've been told. Dreaming`s free.
    Think I'll go, back to sleep.
    Everybody listen, voices in my head
    Everybody listen, do yours say, what mine says?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •