Results 1 to 12 of 12

Thread: FOR SALE: 1990 ZXR250A

  1. #1
    Join Date
    23rd April 2004 - 19:16
    Bike
    2010 DC Skate Shoes
    Location
    Roxby Downs, SA
    Posts
    7,089

    FOR SALE: 1990 ZXR250A

    Has just under 50,000km on the clock, new rear shock.

    Getting professionaly resprayed gloss black at the moment, so will be ready to be custom decaled and then clear coated.

    Work done includes new steering head bearings, new cam chain and tensioner parts replaced.

    Has after market stainless header pipes and a carbon fibre 'Massert' straight through racing exhaust and a 'Beet' stainless/alluminium pipe that needs tidying up.

    Has good condition steel air intake pipes.

    Has a 1/4 used bridgestone BT45 on the front, and a BT92 on the rear, recieved a new rear brake disc and brake pads all round for re-VINing in June. Also has a gold O-ring chain that has 12,000km on it (should be good for another 10,000km if looked after)

    Comes with a few spares like a C model brake caliper, ignition coils, a few spare fairings in good condition, and a petrol tank ready for spraying that needs rust removal done ($60).

    Oil changed every 4000km, using full synthetic oil.

    Was going to sell for $3750 but will take offers from $3500 considering that it needs new rubber on the rear.

    I have reciepts for all work done on it since i have owned it, and also have an owners manual an electronic copy of the workshop manual in english. Will throw in a free can of Castrol spray on chain oil.

    first pic is the bike with all the fairings on, second picture is showing what the bike with a black paint job, will look better than this as it is getting a professional spray job done.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	keystone.jpg 
Views:	111 
Size:	69.6 KB 
ID:	17394   Click image for larger version. 

Name:	goodpaint.jpg 
Views:	146 
Size:	41.9 KB 
ID:	17405  
    KiwiBitcher
    where opinion holds more weight than fact.

    It's better to not pass and know that you could have than to pass and find out that you can't. Wait for the straight.

  2. #2
    Join Date
    31st March 2005 - 02:18
    Bike
    CB919, 1090R, R1200GSA
    Location
    East Aucks
    Posts
    10,499
    Blog Entries
    140
    What are you doing with the rear wheel?? I'm assuming the wing mirrors will also be painted gloss black as well?
    Quote Originally Posted by Jane Omorogbe from UK MSN on the KTM990SM
    It's barking mad and if it doesn't turn you into a complete loon within half an hour of cocking a leg over the lofty 875mm seat height, I'll eat my Arai.

  3. #3
    Join Date
    23rd April 2004 - 19:16
    Bike
    2010 DC Skate Shoes
    Location
    Roxby Downs, SA
    Posts
    7,089
    the mirrors will be getting painted. As for the wheel, i can arrange for a swap to a black rim for $25 or so, would be best to do this when the buyer gets the new rubber put on.
    KiwiBitcher
    where opinion holds more weight than fact.

    It's better to not pass and know that you could have than to pass and find out that you can't. Wait for the straight.

  4. #4
    Join Date
    11th October 2005 - 09:32
    Bike
    honda vtr 250
    Location
    north shore auckland
    Posts
    8

    HI

    HAVE YOU STILL GOT YOUR BIKE IM KEEN TO HAVE A LOOK IF POSSIBLE CHEERES

  5. #5
    Join Date
    23rd April 2004 - 19:16
    Bike
    2010 DC Skate Shoes
    Location
    Roxby Downs, SA
    Posts
    7,089
    still have it, its sitting in my garage minus tank and fairings... so you can see it and probably hear it running for about a minute before it will run out of gas!
    KiwiBitcher
    where opinion holds more weight than fact.

    It's better to not pass and know that you could have than to pass and find out that you can't. Wait for the straight.

  6. #6
    Join Date
    23rd April 2004 - 19:16
    Bike
    2010 DC Skate Shoes
    Location
    Roxby Downs, SA
    Posts
    7,089
    bump.....
    KiwiBitcher
    where opinion holds more weight than fact.

    It's better to not pass and know that you could have than to pass and find out that you can't. Wait for the straight.

  7. #7
    Join Date
    15th February 2003 - 10:49
    Bike
    Tyre Shredder
    Location
    In my own mind
    Posts
    3,869
    Quote Originally Posted by gareth_d
    bump.....
    The spray job done yet??

    Post some pics of the new hotness might get more of a response..
    Lump lingered last in line for brains,
    And the ones she got were sort of rotten and insane...

  8. #8
    Join Date
    23rd April 2004 - 19:16
    Bike
    2010 DC Skate Shoes
    Location
    Roxby Downs, SA
    Posts
    7,089
    yeh, thats what im waiting for... the guy is taking ages - gonna go talk to him tomorrow.
    KiwiBitcher
    where opinion holds more weight than fact.

    It's better to not pass and know that you could have than to pass and find out that you can't. Wait for the straight.

  9. #9
    Join Date
    23rd April 2004 - 19:16
    Bike
    2010 DC Skate Shoes
    Location
    Roxby Downs, SA
    Posts
    7,089
    SOLD! $3700 negotiated... gotta get some stuff done on it but it works out the same at the end of the day.

    Its gone to a KB'er but im not sure who he is on the site
    KiwiBitcher
    where opinion holds more weight than fact.

    It's better to not pass and know that you could have than to pass and find out that you can't. Wait for the straight.

  10. #10
    Join Date
    3rd December 2004 - 16:37
    Bike
    Coming to a store near you
    Location
    Whan(fun)garei
    Posts
    278
    bah! we didn't even get to see updates shots of it!

  11. #11
    Join Date
    24th June 2005 - 10:52
    Bike
    06 Speed Triple
    Location
    Te Puke
    Posts
    38
    it would be me
    cant wait

  12. #12
    Join Date
    23rd April 2004 - 19:16
    Bike
    2010 DC Skate Shoes
    Location
    Roxby Downs, SA
    Posts
    7,089
    Quote Originally Posted by Suney
    bah! we didn't even get to see updates shots of it!
    dont worry mate, i'll post some up, might have to take it for a lil ride before selling it. a lot of hard work (and lynx aye affman) went into that bike!
    KiwiBitcher
    where opinion holds more weight than fact.

    It's better to not pass and know that you could have than to pass and find out that you can't. Wait for the straight.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •