w t b mikuni rs 36 flat slide carb(s)

**jato** · 13th November 2017, 14:48

For a project bike i need a couple of sets of rs 36's - the side draught version such as used on the early gs1000 etc

**jellywrestler** · 13th November 2017, 18:30

what ya building Jimmy?

**Grumph** · 13th November 2017, 20:20

Must be a V8 powered time machine. I think he means the flatslides used on early GSXR1100's - not GS1000's.

Initially a few sets of 36's came in. Then everyone realised that they could get 38's and 40's for pretty much the same price.
36's are still pretty scarce. Still available new from Sudco. Not cheap.

**jato** · 13th November 2017, 21:28

Hmmmm you dont want to know... I'm about 800 hrs into a v6 two stroke...

**Grumph** · 14th November 2017, 05:15

Well, you don't want RS's - they don't adapt well to 2 strokes. Later individual flatslides - Mikuni TM's or Keihin PWK - are far more tunable.

**jato** · 14th November 2017, 08:14

Fully researched and do-able...there are other options but they come with some downsides. initial tuning will be done with a yz 125.

**Grumph** · 14th November 2017, 10:58

Originally Posted by jato

Fully researched and do-able...there are other options but they come with some downsides. initial tuning will be done with a yz 125.

Okay.. still might be hard to find though. There's a guy in Queensland buying up what 36's appear on ebay, then cutting them into sets of 3 for Laverdas.

**jato** · 14th November 2017, 11:14

Cheers - ive seen the laverda site.i've earmarked some in the us but shipping and exchange rates are eyewatering...If none surface in nz i'll have to bite the bullet.

**jato** · 17th November 2017, 19:13

Ok it was a bit of a tall order... if any one has a set i could measure the physical dimensions of it would be much appreciated, before i commit a big lump of $$ to e bay . cheers

**jellywrestler** · 17th November 2017, 19:29

try posting in the post classic section maybe, also do you do facebook? if so there are sites there that are very active.

**jato** · 17th November 2017, 19:35

Originally Posted by jellywrestler

try posting in the post classic section maybe, also do you do facebook? if so there are sites there that are very active.

thanks - i'll try my luck on both those .I've nearly finished the patterns and i want to be sure the carbs are going to be sweet before we start pouring aluminium

**oldfart1** · 24th March 2018, 09:23

Originally Posted by jato

For a project bike i need a couple of sets of rs 36's - the side draught version such as used on the early gs1000 etc

I have a new set, unused with cable attached. Was for a Toyota 4AGE project many years ago. Used Weber instead.
If you're still interested I'll send a photo and further details.
Cheers.

**jato** · 16th June 2018, 20:59

Cool! i've only just seen your reply and have sent a pm cheers

**jato** · 22nd July 2018, 11:36

There's been no response from oldfart1 - it seems he's joined up and made a couple of posts then vanished. doesn't a pm go to his regular inbox? if anyone has a good idea on how i can get in touch with him ...

**husaberg** · 23rd July 2018, 00:59

Originally Posted by jato

There's been no response from oldfart1 - it seems he's joined up and made a couple of posts then vanished. doesn't a pm go to his regular inbox? if anyone has a good idea on how i can get in touch with him ...

contact mental trousers he may have an option ticked where administrators or mods can email him.
https://www.kiwibiker.co.nz/forums/m...ental-Trousers