Page 1 of 2 12 LastLast
Results 1 to 15 of 25

Thread: A light hearted question regarding my Worm drive:

  1. #1
    Join Date
    8th October 2006 - 20:21
    Bike
    Purple Vespa 250
    Location
    2nd Star right of Centre
    Posts
    125

    A light hearted question regarding my Worm drive:

    Im having an issue with the drive train holding together:

    The QX15 reactor is chewing through fuel rods at a hell of a rate:

    The worm drive in the slipper clutch drive ring keeps burning out.

    At warp factor 5, all imagery disappears and Im riding blind:

    When the turbo to the reactor engages at +3600PSI, the thing wont stay on the ground:

    MY questions are?.

    Does anyone know of a more efficient brand of fuel rods other than those supplied with the QX 15?

    How can I stop the worm drive from burning out?

    How can I retain imagery at velocities above Warp factor 5?

    Who makes a waste gate that will blow at around 3500Psi?

    A condom is to keep ones Pipe clean.

  2. #2
    Join Date
    1st September 2007 - 21:01
    Bike
    1993 Yamaha FJ 1200
    Location
    Paradise
    Posts
    14,126
    Blog Entries
    2
    Quote Originally Posted by crack View Post
    MY questions are?.

    Does anyone know of a more efficient brand of fuel rods other than those supplied with the QX 15?

    How can I stop the worm drive from burning out?

    How can I retain imagery at velocities above Warp factor 5?

    Who makes a waste gate that will blow at around 3500Psi?

    The QX 15 was superseded by the RZ 125. The same rods are used.

    Your lubricant pressure system needs upgrading. You obviously have the older version.

    The change to those upgrades I stated will keep it stable to Warp factor 7. 440 cu/i V8 rods needed to go faster.

    Supercheap Auto.
    When life throws you a curve ... Lean into it ...

  3. #3
    Join Date
    9th January 2005 - 22:12
    Bike
    Street Triple R
    Location
    christchurch
    Posts
    8,198
    I was fairly sure that the worm drive had been superseded by the mycelial network spore hub drive which allowed instantaneous travel anywhere. You just need to shoot your navigator full of, er, glowy things.
    I thought elections were decided by angry posts on social media. - F5 Dave

  4. #4
    Join Date
    6th May 2012 - 10:41
    Bike
    invisibike
    Location
    pulling a sick mono
    Posts
    6,057
    Blog Entries
    4
    engorge the flux capacitator.

  5. #5
    Join Date
    8th October 2006 - 20:21
    Bike
    Purple Vespa 250
    Location
    2nd Star right of Centre
    Posts
    125

    By Crikey:

    Crikey Dick!

    Look I am ever so so great full, the response has surpassed my expectations:

    I am totally gobsmacked at the level of Boffinary practice on KB:

    I shall try these as advised and report back:

    Shit Warp factor 7, now you talking, Fookin "A" man!

    PS: I did remove the sliding overhead sump, and I did replace the chrome grease nipples with new Pink Chrome nipples made in Japan, they stay a constant 96.6 degrees.
    A condom is to keep ones Pipe clean.

  6. #6
    Join Date
    10th June 2008 - 15:44
    Bike
    ES XTZ
    Location
    CH-CH
    Posts
    1,366
    Quote Originally Posted by crack View Post
    Im having an issue with the drive train holding together:

    The QX15 reactor is chewing through fuel rods at a hell of a rate:





    MY question is ?.

    Does anyone know of a more efficient brand of fuel rods other than those supplied with the QX 15?





    Dilithium Crystals get ya minions mining

  7. #7
    Join Date
    8th October 2006 - 20:21
    Bike
    Purple Vespa 250
    Location
    2nd Star right of Centre
    Posts
    125

    South Zilgerstan

    Quote Originally Posted by mulletman View Post
    Dilithium Crystals get ya minions mining
    can get me some ciconian Ion rods, they allow the reactor to run at a constant 110% at 15,000.000.000 BTU's.

    Still working on the worm and the Turbo?
    A condom is to keep ones Pipe clean.

  8. #8
    Join Date
    1st March 2017 - 06:23
    Bike
    1976 Honda GL1000, plus implements
    Location
    round the back
    Posts
    467
    Noooo! you can't increase the temp/pressure ratio until you've balanced the hypoid exchange moleculafyer!
    And why is everyone ignoring the spacial vacuum matrix????
    My mate Steve (a fully qualified bogun examplifier) is a dab hand at equalising temporal hexathanes in almost anything and you should definately see him if you're ever near Lexa 12 (he's just off to the left of the energy constant) before you do anything with the neutron flow OR the gas irradiator.

    In the meantime if you just concentrate on those pink nipples you should be fine, although keep them well lubricated or excess heat may develop
    High miles, engine knock, rusty chrome, worn pegs...
    Brakes as new

  9. #9
    Join Date
    1st September 2007 - 21:01
    Bike
    1993 Yamaha FJ 1200
    Location
    Paradise
    Posts
    14,126
    Blog Entries
    2
    Quote Originally Posted by Honest Andy View Post
    In the meantime if you just concentrate on those pink nipples you should be fine, although keep them well lubricated or excess heat may develop
    Too much (or excessive) play with pink nipples will lead to excess liquidity in some areas. If this occurs ... larger (or thicker) rods may need to be inserted.
    When life throws you a curve ... Lean into it ...

  10. #10
    Join Date
    10th December 2009 - 22:42
    Bike
    less than I used to have
    Location
    Canterbury
    Posts
    3,168
    Quote Originally Posted by FJRider View Post
    Too much (or excessive) play with pink nipples will lead to excess liquidity in some areas. If this occurs ... larger (or thicker) rods may need to be inserted.
    ...I think they may need more than 96.9 degrees of separation before insertion though...it's worth checking...

  11. #11
    Join Date
    1st September 2007 - 21:01
    Bike
    1993 Yamaha FJ 1200
    Location
    Paradise
    Posts
    14,126
    Blog Entries
    2
    Quote Originally Posted by ellipsis View Post
    ...I think they may need more than 96.9 degrees of separation before insertion though...it's worth checking...
    Two or more rods being inserted at the same time can be done ... but this usually increases pulse rate in the worm drive to dangerous levels. Some excessive engine is often noted at this time. Blocking of the air intake may reduce this (Extra engine tie-downs may be required).
    When life throws you a curve ... Lean into it ...

  12. #12
    Join Date
    8th October 2006 - 20:21
    Bike
    Purple Vespa 250
    Location
    2nd Star right of Centre
    Posts
    125

    Bugger!

    So much more info!

    Yes the Hypoid exchange, HOW could I oversee this, Fuck! Where did you study this shit to be so factual in your advisory!
    A condom is to keep ones Pipe clean.

  13. #13
    Join Date
    8th October 2006 - 20:21
    Bike
    Purple Vespa 250
    Location
    2nd Star right of Centre
    Posts
    125

    Bugger:

    Quote Originally Posted by FJRider View Post
    Too much (or excessive) play with pink nipples will lead to excess liquidity in some areas. If this occurs ... larger (or thicker) rods may need to be inserted.
    Nippon nipples! I have always tried to stay in touch with the Chrome plated pink nipples, I have found them to be extremely great value for money! it is the HI HI HI HI HI HI HI HI that keeps me going.
    A condom is to keep ones Pipe clean.

  14. #14
    Join Date
    8th October 2006 - 20:21
    Bike
    Purple Vespa 250
    Location
    2nd Star right of Centre
    Posts
    125

    Okay!

    Quote Originally Posted by ellipsis View Post
    ...I think they may need more than 96.9 degrees of separation before insertion though...it's worth checking...
    How do I get them above 96.6 Degrees of separation before insertion?

    What process would you recommend?
    A condom is to keep ones Pipe clean.

  15. #15
    Join Date
    8th October 2006 - 20:21
    Bike
    Purple Vespa 250
    Location
    2nd Star right of Centre
    Posts
    125

    Look here now!

    Quote Originally Posted by Honest Andy View Post
    Noooo! you can't increase the temp/pressure ratio until you've balanced the hypoid exchange moleculafyer!
    And why is everyone ignoring the spacial vacuum matrix????
    My mate Steve (a fully qualified bogun examplifier) is a dab hand at equalising temporal hexathanes in almost anything and you should definately see him if you're ever near Lexa 12 (he's just off to the left of the energy constant) before you do anything with the neutron flow OR the gas irradiator.

    In the meantime if you just concentrate on those pink nipples you should be fine, although keep them well lubricated or excess heat may develop
    I never thought of such, Fuck it, how come you know this shit? yes when I feed the algorithm into the yogleflogen 2016 systematic s program for algorithm de-cyphoring, it proves the increase in temperature/pressure ratio:

    When I key in the spacial vacuum matrix, it shows a negative value, this should not be so! I cant figure it out?
    A condom is to keep ones Pipe clean.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •