Hi all,I am after a DB Killer to fit a Yoshi RS3 oval muffler the 2 into 1 system on my 07 SV1000 is a bit on the noisy side says the wof man. Thanks.
Hi all,I am after a DB Killer to fit a Yoshi RS3 oval muffler the 2 into 1 system on my 07 SV1000 is a bit on the noisy side says the wof man. Thanks.
take it to AA they dont have noise meters. well not here anyways.
or make one of these
have access to a welder? cut a sheet metal "oval" shape then some stock to wrap around it, drill a hole in the center chuck some tube up the guts of it and tack it in place. when you are happy drill a hole in the bottom of the exhaust tip and bolt the bugger in, after wof take it out if you want.
Thanks for your advice
Do some measurements and see if one of these bad boys will fit up ya pipe.
https://www.trademe.co.nz/motors/mot...34004cff9d67ae
Hi,thanks for your help but this is an oval muffler and the db killer is mounted with an oval flange with 2x 6m bolts securing it. Cheers !
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks