Results 1 to 9 of 9

Thread: XR200 gearshaft/countershaft ????

  1. #1
    Join Date
    13th March 2019 - 19:41
    Bike
    xr400
    Location
    Nelson NZ
    Posts
    1

    XR200 gearshaft/countershaft ????

    Hi I stripped down what I thought was my 81 Honda xr200 as I wanted to replace the shaft that the front sprocket was on as previous owner had welded it on. Also tidying up the motor at same time. However the hiccup I have come across is that when I recieved another shaft from honda dismantler it was a fatter shaft. I then looked for numbers on my motor to get model and year but grrrr they have been ground off. I am hoping that someone can tell me when the shafts changed in size so I can have another go at finding a good secondhand one. I have been to my local bike shop and they were not aware of a change and said would take them alot of work to find out. Any help would be much appreciated so I can get my correct part and bike back together.
    Cheers Mike

  2. #2
    Join Date
    28th May 2006 - 19:35
    Bike
    suzuki
    Location
    lower hutt
    Posts
    7,918
    Quote Originally Posted by mike white View Post
    I then looked for numbers on my motor to get model and year but grrrr they have been ground off.
    so you want us to help you with your stolen bike?

  3. #3
    Join Date
    1st October 2005 - 23:01
    Bike
    Niftyfifty
    Location
    auckland
    Posts
    567
    Quote Originally Posted by jellywrestler View Post
    so you want us to help you with your stolen bike?
    Lol yes I wouldn’t bother fixing or even working on something with the numbers ground off,

  4. #4
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823
    Quote Originally Posted by mike white View Post
    Hi I stripped down what I thought was my 81 Honda xr200 as I wanted to replace the shaft that the front sprocket was on as previous owner had welded it on. Also tidying up the motor at same time. However the hiccup I have come across is that when I recieved another shaft from honda dismantler it was a fatter shaft. I then looked for numbers on my motor to get model and year but grrrr they have been ground off. I am hoping that someone can tell me when the shafts changed in size so I can have another go at finding a good secondhand one. I have been to my local bike shop and they were not aware of a change and said would take them alot of work to find out. Any help would be much appreciated so I can get my correct part and bike back together.
    Cheers Mike
    If you take the engine into the Police station they will be able to use their special Grumman laser reader to read the original engine number for you free of charge.
    Tell them husaberg sent you.
    Without the engine number you are pushing shit uphill as the XR200 has many different countershaft lengths.
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

  5. #5
    Join Date
    28th May 2006 - 19:35
    Bike
    suzuki
    Location
    lower hutt
    Posts
    7,918
    Quote Originally Posted by husaberg View Post
    If you take the engine into the Police station they will be able to use their special Grumman laser reader to read the original engine number for you free of charge.
    Tell them husaberg sent you.
    Without the engine number you are pushing shit uphill as the XR200 has many different countershaft lengths.
    does this work on semi auto guns with no numbers?

  6. #6
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823
    Quote Originally Posted by jellywrestler View Post
    does this work on semi auto guns with no numbers?
    It works on Car Vins and rifles and engines anything that has a groung of stamped or cast serial number.
    Its the dogs bollocks
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

  7. #7
    Join Date
    28th May 2006 - 19:35
    Bike
    suzuki
    Location
    lower hutt
    Posts
    7,918
    Quote Originally Posted by husaberg View Post
    It works on Car Vins and rifles and engines anything that has a groung of stamped or cast serial number.
    Its the dogs bollocks
    tattoo removal?

  8. #8
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823
    Quote Originally Posted by jellywrestler View Post
    tattoo removal?
    If they were on the dogs bollocks Yes.
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

  9. #9
    Join Date
    1st September 2007 - 21:01
    Bike
    1993 Yamaha FJ 1200
    Location
    Paradise
    Posts
    14,126
    Blog Entries
    2
    Quote Originally Posted by husaberg View Post
    If you take the engine into the Police station they will be able to use their special Grumman laser reader to read the original engine number for you free of charge.
    Tell them husaberg sent you.

    If it does prove to be stolen ... I'm sure the station is the right place to find out ...

    But at least he wont need to fix it anymore ...

    And he'll be only too happy to say how to find you ...
    When life throws you a curve ... Lean into it ...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •