Results 1 to 9 of 9

Thread: Converting an oil injection CCI system to premix

  1. #1
    Join Date
    1st October 2005 - 23:01
    Bike
    Niftyfifty
    Location
    auckland
    Posts
    567

    Converting an oil injection CCI system to premix

    I use to own Yamaha DT 175s and an AG175 in my younger days, and been wanting something like that for a wile, I got the other day a 1984 YZ250 witch has a Suzuki TS185 motor shoehorned into it, it has the CCI injection removed witch feeds the LH main bearing witch now has lots of play, got another motor witch had a broken CCI cable and that has a bugged LH main to, I had an idea to cut a channel from the oil gallery in the cylinder accoss to the transfure port and plug both oil feeds, then it should be able to chuff up the little hole and get some mixture flowing through the bearing what do you reckon? Click image for larger version. 

Name:	DB3766C0-8CAE-4C06-A400-02674E707FAD.jpg 
Views:	57 
Size:	808.8 KB 
ID:	341353

  2. #2
    Join Date
    1st October 2005 - 23:01
    Bike
    Niftyfifty
    Location
    auckland
    Posts
    567
    Theft hand crank bearing is a special bearing, it has an oil slinger, I will get rid of this to.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	45081A2D-07F4-4CBE-AC3B-1BCD9CC516FF.jpg 
Views:	37 
Size:	817.3 KB 
ID:	341355  

  3. #3
    Join Date
    13th June 2010 - 17:47
    Bike
    Exercycle
    Location
    Out in the cold
    Posts
    5,626
    Have you thought this through ? You get rid of the oil slinger and the CCI and you'd need to cut slots in the big end eye of the rod for access to lubrication.

    Maybe you have done this before ?

  4. #4
    Join Date
    1st October 2005 - 23:01
    Bike
    Niftyfifty
    Location
    auckland
    Posts
    567
    Quote Originally Posted by Grumph View Post
    Have you thought this through ? You get rid of the oil slinger and the CCI and you'd need to cut slots in the big end eye of the rod for access to lubrication.

    Maybe you have done this before ?

    It already has slots in the middle rod witch is nice.

  5. #5
    Join Date
    1st October 2005 - 23:01
    Bike
    Niftyfifty
    Location
    auckland
    Posts
    567
    The rod is also used in the PE175

  6. #6
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street 765RS/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    20,500
    Blog Entries
    2
    I'd, and have, drill the hole central in transfer straight down in the centre.
    Don't you look at my accountant.
    He's the only one I've got.

  7. #7
    Join Date
    1st October 2005 - 23:01
    Bike
    Niftyfifty
    Location
    auckland
    Posts
    567
    Quote Originally Posted by F5 Dave View Post
    I'd, and have, drill the hole central in transfer straight down in the centre.
    That would be ideal but the cace would need to be built up with weld on the other side so there was something to drill through.

  8. #8
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street 765RS/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    20,500
    Blog Entries
    2
    Ah. Faith drilling.

    May God, and The Force be with you.
    Don't you look at my accountant.
    He's the only one I've got.

  9. #9
    Join Date
    20th January 2010 - 14:41
    Bike
    husaberg
    Location
    The Wild Wild West
    Posts
    11,823
    Quote Originally Posted by rudolph View Post
    That would be ideal but the cace would need to be built up with weld on the other side so there was something to drill through.
    Which side the primary drive said can be oiled from the transmission lube and the mag side would have had a oilway std wouldnt it.
    Looks like the Silver bearing out of a RG250 might work as well, but check i think there were two widths of Rod.
    if there is no oilway on the mag side from the transfers you can gle a tube into the drilling. But if the seal is on the outside on the mag sise and the inside on the primary drive side no drilling is really needed?
    Quote Originally Posted by Katman View Post
    I reminder distinctly .




    Kinky is using a feather. Perverted is using the whole chicken

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •