Page 6 of 6 FirstFirst ... 456
Results 76 to 84 of 84

Thread: Yamaha RZ/Banshee build

  1. #76
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street Triple R/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    18,111
    In theory should provide better accoss the range but I've blocked them or used them depending upon what worked best for the bike.

    Spend a bunch of time making sure the float jet works reliably. I'd swap for keihin parts personally. Have to turn carb upside down to remove bowl, as also on PWK, as they are a copy, but also check float doesnt rub. Might need manipulation.
    I've been told. Dreaming`s free.
    Think I'll go, back to sleep.
    Everybody listen, voices in my head
    Everybody listen, do yours say, what mine says?

  2. #77
    Join Date
    5th December 2010 - 23:03
    Bike
    rgv250 vj22
    Location
    Palmy
    Posts
    67
    I am definitely going to need to do something about the clutch arm, it is very stiff with the heavy duty springs.
    I also mounted the RD350LC stator. I had to drill and slot two of the holes to get it to fit on the banshee cases. I used a dial gauge to set the static advance to 25 degrees.
    Click image for larger version. 

Name:	0D94B629-D3F0-4CC7-8AF0-A6DADF5DF1D5.jpg 
Views:	35 
Size:	784.6 KB 
ID:	348134

  3. #78
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street Triple R/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    18,111
    If it's not a big hp engine you can get away with every 2nd spring heavy and alternate std springs. Mine is grazing 100hp so I have extra plate conversion and all stiff but longer arm helps.
    I've been told. Dreaming`s free.
    Think I'll go, back to sleep.
    Everybody listen, voices in my head
    Everybody listen, do yours say, what mine says?

  4. #79
    Join Date
    5th December 2010 - 23:03
    Bike
    rgv250 vj22
    Location
    Palmy
    Posts
    67
    I was thinking that, I’ll see what some springs will set me back.

  5. #80
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street Triple R/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    18,111
    If I remember I'll go have a look. Cant remember what I have but have come into several sets from various kits.

    Longer arm is worth it anyway and virtually free.
    I've been told. Dreaming`s free.
    Think I'll go, back to sleep.
    Everybody listen, voices in my head
    Everybody listen, do yours say, what mine says?

  6. #81
    Join Date
    5th December 2010 - 23:03
    Bike
    rgv250 vj22
    Location
    Palmy
    Posts
    67
    Carbs are here and they fit . . . Just. I might make a small spacer up to help them clear everything. Jetting wise they come with a JJH Needle, 112MJ and a 32 Pilot the power jet doesn’t seem to have a size on it. But I’m hoping I only need to change the main jet to sort out any tuning.
    It seems the pilots are usually in the 45-55 range on banshees with the pwk and the mains in the 145-155 range without power jets.
    If the power jet is around a 30 hopefully the mains are roughly the right size to at least start mucking around with the bike.
    Click image for larger version. 

Name:	6824A549-543B-47FA-8C35-6A51EF32EA78.jpg 
Views:	40 
Size:	847.1 KB 
ID:	348187

  7. #82
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street Triple R/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    18,111
    Sorry had a few. I've just popped down
    To the garage. Hope you understand the wife is ready to go so time is limited. Found 3 heavy duty springs at 44mm long. Yours if you want them.

    Busy making irrigation holes.
    I've been told. Dreaming`s free.
    Think I'll go, back to sleep.
    Everybody listen, voices in my head
    Everybody listen, do yours say, what mine says?

  8. #83
    Join Date
    5th December 2010 - 23:03
    Bike
    rgv250 vj22
    Location
    Palmy
    Posts
    67
    Thank you. you wouldn’t by chance have standard clutch springs? As I already have heavy duty ones and no standard ones?

  9. #84
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street Triple R/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    18,111
    Ahh yes those too. Pm me your address and when I can get past a post office ill send them.
    I've been told. Dreaming`s free.
    Think I'll go, back to sleep.
    Everybody listen, voices in my head
    Everybody listen, do yours say, what mine says?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •