Page 7 of 7 FirstFirst ... 567
Results 91 to 98 of 98

Thread: Yamaha RZ/Banshee build

  1. #91
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street Triple R/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    18,509
    Probably won't leak when it's hot. That's a tiny leak.
    I've been told. Dreaming`s free.
    Think I'll go, back to sleep.
    Everybody listen, voices in my head
    Everybody listen, do yours say, what mine says?

  2. #92
    Join Date
    5th December 2010 - 23:03
    Bike
    rgv250 vj22
    Location
    Palmy
    Posts
    75
    The leak seems even smaller today. .75 over 30 mins. Looks like Iíll just chuck it back in the bike

  3. #93
    Join Date
    5th December 2010 - 23:03
    Bike
    rgv250 vj22
    Location
    Palmy
    Posts
    75
    So now I am having some trouble getting a spark with the zeeltronic. Any help would be appreciated.
    I have it wired up as shown in this diagram. All of the settings are set as per the zeeltronic manual.
    Click image for larger version. 

Name:	83CEF20C-9C46-4C04-AEE5-5F06EE864631.png 
Views:	26 
Size:	193.2 KB 
ID:	349089
    The resistance on the pick up is 87
    The red-brown wire measures 250
    Also the wires have continuity to the CDI
    I have been spinning the bike over with a drill and the plugs out.

    I have temporarily fitted the Chinese banshee stator and rotor and the Chinese CDI and used the same earth and coil wires and this is providing perfect spark.
    Obviously this wonít allow me to program a curve or run a quickshifter or use the Aprilia dash which is the end goal.

    Maybe someone has a stator kicking around I can test or offer some insight into something I may have overlooked.
    Cheers

  4. #94
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street Triple R/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    18,509
    So starting at the start. Tell us about your battery.
    I've been told. Dreaming`s free.
    Think I'll go, back to sleep.
    Everybody listen, voices in my head
    Everybody listen, do yours say, what mine says?

  5. #95
    Join Date
    5th December 2010 - 23:03
    Bike
    rgv250 vj22
    Location
    Palmy
    Posts
    75
    Iím just running the rgv battery, itís showing 12.4v. Iím not running the charging system, just seeing if itíll spark. Running the red wire to the positive and the - terminal to the chassis which has continuity to the CDIs black wires. Iíll try it again tomorrow and take some pictures of the set up.

  6. #96
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street Triple R/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    18,509
    As you spin it over check voltage does fall to like 10V or you won't get joy.

    Does the Zeel have a test spark feature like the ignitech?
    Disconnect kill and quickshifter to be sure.

    So where is the earth for the unit? Via the stator? Black wire yeah. Measure that is earth.

    Seems odd to me that the stator coils are attached on a DCpowered cdi. Check the pickup coil hasn't been knocked too far away from the magnet of the stator.

    Edit, if you tend toward colour blind like me, I'd double check any red green or brown wires are in fact correct.
    I've been told. Dreaming`s free.
    Think I'll go, back to sleep.
    Everybody listen, voices in my head
    Everybody listen, do yours say, what mine says?

  7. #97
    Join Date
    5th December 2010 - 23:03
    Bike
    rgv250 vj22
    Location
    Palmy
    Posts
    75
    Voltage stays at 12.2 v when spinning.
    The red and brown wire when tested for AC voltage only crank out about 4-4.5 V
    I disconnected the kill switch and to make sure it wasnít faulty.

    The set up is a bit of a mess but itís only temporary.
    Click image for larger version. 

Name:	891B75E5-813A-48B8-8767-CBFC176BE880.jpg 
Views:	17 
Size:	787.2 KB 
ID:	349110Click image for larger version. 

Name:	DAE2BBF4-B2F9-45B7-ADED-B1657405D8FB.jpg 
Views:	12 
Size:	791.2 KB 
ID:	349111Click image for larger version. 

Name:	E5993D95-19A2-4233-8267-8A7A06968625.jpg 
Views:	12 
Size:	805.5 KB 
ID:	349112Click image for larger version. 

Name:	5A204670-313B-463E-8597-612EFE1F042F.jpg 
Views:	15 
Size:	772.4 KB 
ID:	349113

  8. #98
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street Triple R/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    18,509
    Running out of ideas. Remove the plugs from reedblocks so it turns over faster? Try a faster drill?

    Check at the cdi red and black that you have 12v.
    I've been told. Dreaming`s free.
    Think I'll go, back to sleep.
    Everybody listen, voices in my head
    Everybody listen, do yours say, what mine says?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •