Page 29 of 33 FirstFirst ... 192728293031 ... LastLast
Results 421 to 435 of 492

Thread: the clean two-stroke thread

  1. #421
    Join Date
    12th March 2010 - 16:56
    Bike
    TT500 F9 Kawasaki EFI
    Location
    Hamilton New Zealand
    Posts
    2,764
    The trouble with sleeve valves is you need a lot of oil, to help it transfer heat.

  2. #422
    Join Date
    4th September 2017 - 10:39
    Bike
    Daelim besbi 2008
    Location
    España
    Posts
    300
    Quote Originally Posted by Flettner View Post
    The trouble with sleeve valves is you need a lot of oil, to help it transfer heat.
    Fortunately you know the three techniques that come together in this suggestion (HCCI, OP and SLEEVE VALVE) and you know where the fault is that makes it disposable

  3. #423
    Join Date
    4th September 2017 - 10:39
    Bike
    Daelim besbi 2008
    Location
    España
    Posts
    300
    I thought that the mixture could act as a coolant for the valve sleeve, but unevenly, not in the same way throughout the sleeve since there may be areas where the outer zone of the sleeve does not come into contact with the mixture
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	sleeve valve.jpg 
Views:	58 
Size:	21.8 KB 
ID:	349167  

  4. #424
    Join Date
    3rd January 2012 - 01:25
    Bike
    -
    Location
    -
    Posts
    284
    Euro 5 two-stroke with direct injection:

    https://www.visordown.com/news/new-b...tion-heres-how

    I am, however, unable to find the injectors for the direct injection in the pictures. So might be "just" crankcase or throttle body fuel injection after all.

    On their homepage it says injection without further details.

    https://langenmotorcycles.co.uk/

  5. #425
    Join Date
    12th March 2010 - 16:56
    Bike
    TT500 F9 Kawasaki EFI
    Location
    Hamilton New Zealand
    Posts
    2,764
    Yeah, dosent look very Euro5.
    Smoke bellowing out the back
    Maybe Euro5 is allowed good smelling twostroke smoke?

  6. #426
    Join Date
    4th September 2017 - 10:39
    Bike
    Daelim besbi 2008
    Location
    España
    Posts
    300

  7. #427
    Join Date
    4th September 2017 - 10:39
    Bike
    Daelim besbi 2008
    Location
    España
    Posts
    300
    A year ago I indicated a possible solution for the TPI system to be imposed on the use of the carburetor, at more economical levels and thus be more affordable for much of the world.
    In that line I tried to create something that corresponded to what was indicated and what I show you is part of it.
    It is a type of pumping that is only possible in the 2S and that would never work in a 4S.
    The operation is simple, at the cost of two pumps: a vacuum driven by the crankcase and the other by a plunger driven by combustion in the cylinder.

    Image 2 shows the inputs and outputs of the two pumps and the description of the operation is:
    1 crankcase vacuum
    2 empty pump filling
    3 emptying pump vacuum
    4 high pressure pump filling
    5 plunger impulse input
    6 emptying high pressure pump

    images 3y4:
    control mechanism of quantity to be pumped to the injectors


    image 5 description of the operation of the bypass valves in the sections:
    1 filling from the tank
    2 pumping to the high pressure pump
    3 return to deposit
    4 high pressure pump filling
    5 pumping to injectors.
    Valves 3-4-5 must have special characteristics regarding the opening pressure:
    valve 3 must have an opening pressure higher than valve 4 and lower than valve 5

    This design is for 50cc motorcycles
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	inicio.jpg 
Views:	37 
Size:	151.4 KB 
ID:	349393   Click image for larger version. 

Name:	pumps.jpg 
Views:	24 
Size:	66.4 KB 
ID:	349394   Click image for larger version. 

Name:	mecanismo interno.jpg 
Views:	20 
Size:	88.6 KB 
ID:	349395   Click image for larger version. 

Name:	eje.jpg 
Views:	21 
Size:	30.6 KB 
ID:	349396   Click image for larger version. 

Name:	valve pumps.jpg 
Views:	34 
Size:	39.0 KB 
ID:	349397  

  8. #428
    Join Date
    4th September 2017 - 10:39
    Bike
    Daelim besbi 2008
    Location
    España
    Posts
    300
    Yes, it is a proposal of a type of pump that in production costs may not be lower than an electric or mechanical pump operated by cam.
    But if it has a lower operating cost since it does not use electrical energy or kinetic energy to function.
    The use of this type of pump in comparison with the carburetor would be more the manufacturing cost, but it would share with the carburetor the fact of not consuming energy created by the engine for its operation.

  9. #429
    Join Date
    4th December 2011 - 22:52
    Bike
    Yamaha XJ750 1982
    Location
    South Africa
    Posts
    219

  10. #430
    Join Date
    4th September 2017 - 10:39
    Bike
    Daelim besbi 2008
    Location
    España
    Posts
    300
    Yamaha tpi ?
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Yamaha TPI 1972-10-04.jpg 
Views:	74 
Size:	144.9 KB 
ID:	349737   Click image for larger version. 

Name:	DE_2248584_A1.jpg 
Views:	76 
Size:	525.7 KB 
ID:	349738  

  11. #431
    Join Date
    22nd November 2013 - 16:32
    Bike
    STRIKE trike & KTM300 EXC TPI
    Location
    Perth, Western Australia
    Posts
    878
    Ceci,
    Well it does discharge into the transfer passage, but not against the net air flow direction, but that’s where there’s any similarity.
    It’s interesting though in terms of the fuel metering rate, using the pressure extremes within the crankcase to control the stroke of the plunger pump, hence fuel per cycle (fpc) delivery. Wonder it they ever got it running?
    "Success is the ability to go from one failure to another with no loss of enthusiasm.”

  12. #432
    Join Date
    4th September 2017 - 10:39
    Bike
    Daelim besbi 2008
    Location
    España
    Posts
    300
    Quote Originally Posted by ken seeber View Post
    Ceci,
    Well it does discharge into the transfer passage, but not against the net air flow direction, but that’s where there’s any similarity.
    It’s interesting though in terms of the fuel metering rate, using the pressure extremes within the crankcase to control the stroke of the plunger pump, hence fuel per cycle (fpc) delivery. Wonder it they ever got it running?

    Hi Ken.
    This is one of many attempts "if you check you will see all the others (Boch, Stihl, Martin Clerch and a few others)" to create an injection using the maximum pressure of the crankcase.
    You know that it is not enough pressure that is created, when you collaborated with the creation of the DICTEH in ORBITAL, they decided to use an auxiliary compressor instead of using it as if they do it in the IAPAC in IFP.
    The crankcase pressure is not valid, instead we can use the cylinder pressure (I already showed an attempt that dates from 1919), this other one that I show you has as a reference that of 1919, it can be used in a single cylinder engine, injection in transfer pasage.


  13. #433
    Join Date
    12th March 2010 - 16:56
    Bike
    TT500 F9 Kawasaki EFI
    Location
    Hamilton New Zealand
    Posts
    2,764
    Back on the bench.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	20211003_104913.jpg 
Views:	43 
Size:	805.6 KB 
ID:	349754  

  14. #434
    Join Date
    18th April 2017 - 23:08
    Bike
    Moped
    Location
    Swe
    Posts
    400
    Quote Originally Posted by ceci View Post
    Yamaha tpi ?
    why not an electromagnet like https://m.youtube.com/watch?v=bpA1xwVWJ-M
    or a cam lobe on the web like an old diesel
    No amount of experimentation can ever prove me right; a single experiment can prove me wrong.

  15. #435
    Join Date
    12th February 2004 - 10:29
    Bike
    bucket FZR/MB100
    Location
    Henderson, Waitakere
    Posts
    4,194
    Quote Originally Posted by ceci View Post
    Yamaha tpi ?
    If port 25 had CO2 fed to it controlled by an ECU, like they do to wastegates on high performance turbo engines, I can see it working quite well. TZs Arduino controlling a pair of PWM valves, one in and one out, would probably do it.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •