Results 1 to 8 of 8

Thread: Gsxr400r gk76a cdi

  1. #1
    Join Date
    6th May 2006 - 19:03
    Bike
    2013 Harley custom
    Location
    timaru
    Posts
    353
    Trader Ad Details
    Wanting to buy
    Part
    Price
    $0
    Location
    Timaru - Oamaru

    Gsxr400r gk76a cdi

    Hey guys.
    Needing a cdi for a 91 gsxr400r, mine is well cooked 😂

  2. #2
    Join Date
    13th June 2010 - 17:47
    Bike
    Exercycle
    Location
    Out in the cold
    Posts
    5,192
    Come back with the primary resistance and distance between mounting points - both off your good coil please.

    I have several of these small 2 lead coils in the parts stash.

  3. #3
    Join Date
    6th May 2006 - 19:03
    Bike
    2013 Harley custom
    Location
    timaru
    Posts
    353
    Quote Originally Posted by Grumph View Post
    Come back with the primary resistance and distance between mounting points - both off your good coil please.

    I have several of these small 2 lead coils in the parts stash.

    Hey bud sorry needing a cdi, i think the coils are good...no spark but the cdi is burnt up pretty good...tried a gsf250 cdi the plugs are the same but no spark.

  4. #4
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street 765RS/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    18,889
    That other cdi probably dead as well. They didn't like over voltage and the regulators died and took them with them. I fixed one by replacement of a destroyed fet which I harvested off another that had a separate issue.
    I've been told. Dreaming`s free.
    Think I'll go, back to sleep.
    Everybody listen, voices in my head
    Everybody listen, do yours say, what mine says?

  5. #5
    Join Date
    6th May 2006 - 19:03
    Bike
    2013 Harley custom
    Location
    timaru
    Posts
    353
    Quote Originally Posted by F5 Dave View Post
    That other cdi probably dead as well. They didn't like over voltage and the regulators died and took them with them. I fixed one by replacement of a destroyed fet which I harvested off another that had a separate issue.
    The gsf250 one? It runs the bandit, just not sure if the pinout is the same for the gsxr. Somyoud recommend replacing the reg aswell?

  6. #6
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street 765RS/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    18,889
    I strongly recommend starting the bike when fixed and immediately checking voltage at idle before revving it then slowly bring revs up.

    I'd have thought the cdis were pretty generic at least in operation if not ignition curve. However check a wiring diagram if Lord help you can find one. Perhaps the gsf has a sidestand cut out the 400 doesn't?
    I've been told. Dreaming`s free.
    Think I'll go, back to sleep.
    Everybody listen, voices in my head
    Everybody listen, do yours say, what mine says?

  7. #7
    Join Date
    6th May 2006 - 19:03
    Bike
    2013 Harley custom
    Location
    timaru
    Posts
    353
    Wiring looks a little different, 4pin plug has 3 wires on thebgsxr, gsf has two. So that probably a no go.
    Hopefully I manage to actually find a correct one soon...it's getting hot!

  8. #8
    Join Date
    6th May 2006 - 19:03
    Bike
    2013 Harley custom
    Location
    timaru
    Posts
    353
    Have done abit of hunting and found the part number (very little label left on mine)
    32900-10D00 BB7217
    Looks like they came in some bandit 400s aswell

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •