Hussler class ( Vinduro Buckets)

[Flettner]

Found, In all her glory. Stock standard original, un molested.

[Flettner]

But wait, what do we have here?

[george formby]

A subtle plea for a set of spanners?

[F5 Dave]

It's all a bit of a cry for help.
On so many levels.

I'll pop by the Warehouse on the way back to work and price up a set of Mako wrenches.

We can have a whip around. I reckon about $8 each.
For both of us.

[george formby]

It's all a bit of a cry for help.
On so many levels.

I'll pop by the Warehouse on the way back to work and price up a set of Mako wrenches.

We can have a whip around. I reckon about $8 each.
For both of us.

Cheque, cash or bank transfer?

[F5 Dave]

DaveCoin. Its a bit like Bitcoin but with even less chance of getting your money back.

[husaberg]

So it looks like the cylinder i sent is an e or f so they had bigger finning like a RD400. But they also have better porting more like a RD250LC
Here is a pipe that will work and peak at 11k it will be reasonably exciting. It should handle the ratios in a DT100 box.
if not add a bit to the mid pipe i guess.
Its not going to be 2021 GP spec afterall.








here are the better ratios

DT100A MX100
1 3.18 2.83
2 2.00 1.88
3 1.37 1.37
4 1.00 1.09
5 0.80 0.96

STD AG100 ratios are the widest i have ever seen.
1st 3.181
2nd 1.875
3rd 1.250
4th 0.875
5th 0.666 this top gear is not a typo its out of the service manual.




It looks like a Ag100 has DT100 first MX100 second its own 3rd.

The RS100 has the same ratios and gears as the MX100
Also the RS100 shares some pinions with the 74/75 YZ 125
Some of the gears are also DT125 and DT175 etc etc

[F5 Dave]

Keep 5th gear. Make then know you are serious.


Torches blazed and sacred chants were praised
As they start to cry, hands held to the sky
In the night, the fires are burning bright
The ritual has begun, Satan's work is done
Six six six, the number of the beast

[husaberg]

I had another archeological expedition to the outer shed at the mums.
I found another head, oddly not the other head or the other cylinder?
i am pretty sure its a left hand side one.
It has a plug piston and all, plus 2 sleeve nuts Who else forgot they had sleeve nuts?
This one actully looks crudier then than the last with the pistons little end bearing returning to its base ore.

[F5 Dave]

I remember heating the head gasket ring red on the stove.

[husaberg]

I remember heating the head gasket ring red on the stove.

i know the early ones had those, not so sure the late 250 and 400.
okay off to google and parts fiche, It seems a coper head gasket but in std style for the late 250's

late




vs the ring of the early and 350. But of course the 350's are 350 size.

i think the head has a head gasket attached but its became part of the head.....

[husaberg]

Neil wanted this