Gentlemens
I am seeking advice for a starter motor
It is for an Italian 200cc 2 stroke motor
Looks like a stock part
Anyone recognise the code "SJCE" ?
It has about a 55mm bolt spacing
I need new brushes.
Thanks
=J=
.
Bevelhead Dinosaur
Gentlemens
I am seeking advice for a starter motor
It is for an Italian 200cc 2 stroke motor
Looks like a stock part
Anyone recognise the code "SJCE" ?
It has about a 55mm bolt spacing
I need new brushes.
Thanks
=J=
.
=mjc=
.
In the riders seat
Originally Posted by jim.cox
What brand ?
These guys used to have all sorts of shit in their old place https://wipers-nz.co.nz/contact-us/
"If you can make black marks on a straight from the time you turn out of a corner until the braking point of the next turn, then you have enough power."
Forum whore
what era might help
Bevelhead Dinosaur
this millennium
specialist application
I'm thinking maybe match a scooter of some sort?
(I'd sort a photo if I could - working on that)
=mjc=
.
Forum whore
What are the dimensions of the brushes? Are they like most appliance brshes, a rectangle of carbon with a braided lead and a spring, all retained by a cap? You could possibly find something close from an electric drill or other tool, and file them to size.
it's not a bad thing till you throw a KLR into the mix.
those cheap ass bitches can do anything with ductape.
(PostalDave on ADVrider)
Bevelhead Dinosaur
Good thinking
Unfortunately one of the springs is gone
Which is probably the reason for failure
New brush kit is the easy way to go
TradeMe shows nothing that matches
Looks like I may have to ship some in myself...
=mjc=
.
Forum whore
any automotive electrician should be able to point you in the right direction
No8 Wire Extraordinaire
MWAHAHAHA!
Dance Monkey. DANCE!
Don't you look at my accountant.
He's the only one I've got.
Bevelhead Dinosaur
That's the one Dave.
Any idea what yours was fitted to?
Online, I found a brush kit in the US - but they wont ship to NZ
=mjc=
.
No8 Wire Extraordinaire
Its lightly fitted to my bench presently. Got to be worth $700-800 to get that motor rolling.
Don't you look at my accountant.
He's the only one I've got.
Anorak
Kinky is using a feather. Perverted is using the whole chicken
Forum whore
www.Shipito.com and similar set you up with a US address and then send it on. There is a cost of course but if you really want something...That's the one Dave.
Any idea what yours was fitted to?
Online, I found a brush kit in the US - but they wont ship to NZ
it's not a bad thing till you throw a KLR into the mix.
those cheap ass bitches can do anything with ductape.
(PostalDave on ADVrider)
No8 Wire Extraordinaire
I was just going to send it for postage.
I'll see if it works. No reason it shouldn't, came off a low mileage Derbi 50 engine I bought near 20 years ago. Was too good to throw away.
Don't you look at my accountant.
He's the only one I've got.
No8 Wire Extraordinaire
Yeah it spins up ok on a 6v battery I had to hand so should zing on 12v
Don't you look at my accountant.
He's the only one I've got.
No8 Wire Extraordinaire
So PM us your address if you want it.
Don't you look at my accountant.
He's the only one I've got.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks