Page 1 of 2 12 LastLast
Results 1 to 15 of 20

Thread: wanted Honda rolling frame to suit mini chopper motor

  1. #1
    Join Date
    3rd May 2005 - 07:22
    Bike
    2005 Custom Moped
    Location
    where the sun sets
    Posts
    434

    wanted Honda rolling frame to suit mini chopper motor

    Wanted a larger framed Honda to suit lay forward 50cc engine. To make a big boys moped thx. I have a rollong frame of a CX shaft drive twin disk front end to swap thx

  2. #2
    Join Date
    3rd June 2005 - 15:20
    Bike
    81 katana 650 fighter.
    Location
    West!!!! (Auckzorz)
    Posts
    7,025
    Blog Entries
    2
    got to make sure you don't make her to heavy or itll go very slowly with the 50 in it

    ill have a think as to what you could put it in......do you have gear to change the mounts...or do they have to be the same?

  3. #3
    Join Date
    3rd May 2005 - 07:22
    Bike
    2005 Custom Moped
    Location
    where the sun sets
    Posts
    434
    yeah right a 110 frame would be fine. Would be nice to get a manual clutch conversion??? any clues . on how to. Was thinkin of chopping my RM250 fram alloy swing arm and the tires off the CX are the same size as the RM to get road tires.

  4. #4
    Join Date
    3rd May 2005 - 07:22
    Bike
    2005 Custom Moped
    Location
    where the sun sets
    Posts
    434
    Do have welding gear to make mods. And a mates got a Yam 125 that a prime victim for the chop

  5. #5
    Join Date
    3rd May 2005 - 07:22
    Bike
    2005 Custom Moped
    Location
    where the sun sets
    Posts
    434
    Got a van to pick up and drop off whateva

  6. #6
    Join Date
    3rd September 2005 - 08:19
    Bike
    .
    Location
    .
    Posts
    3,712
    You could use a CBR1000RR Repsol Replica frame but I'm not too sure it could handle all the power you want to put in it.

  7. #7
    Join Date
    3rd June 2005 - 15:20
    Bike
    81 katana 650 fighter.
    Location
    West!!!! (Auckzorz)
    Posts
    7,025
    Blog Entries
    2
    call the guys at 50/50 racing....ask to talk to either richard or kevin.....i know on the thumpstars motors that they can be converted back to manual clutch from an auto clutch but don't know about if it is already auto from factory....

    give them a call...

    0508 4 MOTOX

  8. #8
    Join Date
    3rd May 2005 - 07:22
    Bike
    2005 Custom Moped
    Location
    where the sun sets
    Posts
    434
    if you want to throw one of ur fancy frames at me Dover Ive got a 250cc 2stroke single that will tame the beast only if ur sick of the site of it

  9. #9
    Join Date
    3rd September 2005 - 08:19
    Bike
    .
    Location
    .
    Posts
    3,712
    Try the verge on Peak Rd just before Kaukapakapa. I'm sure I left one lying around up there.

    It might be a little bent tho.

  10. #10
    Join Date
    3rd May 2005 - 07:22
    Bike
    2005 Custom Moped
    Location
    where the sun sets
    Posts
    434
    on the side of the road Dover , it may be easier to find your marbles that you lost there

  11. #11
    Join Date
    3rd May 2005 - 07:22
    Bike
    2005 Custom Moped
    Location
    where the sun sets
    Posts
    434
    thx Mark for 50/50s number but they seem to be engaged all the time I guess they are Auck

  12. #12
    Join Date
    3rd May 2005 - 07:22
    Bike
    2005 Custom Moped
    Location
    where the sun sets
    Posts
    434
    a CG110 Honda frame would be ideal

  13. #13
    Join Date
    3rd May 2005 - 07:22
    Bike
    2005 Custom Moped
    Location
    where the sun sets
    Posts
    434
    Mark that ph# aint Turboed to as the seals are shot been engaged all day

  14. #14
    Join Date
    3rd May 2005 - 07:22
    Bike
    2005 Custom Moped
    Location
    where the sun sets
    Posts
    434
    Markauckland that ph# is still busy

  15. #15
    Join Date
    3rd June 2005 - 15:20
    Bike
    81 katana 650 fighter.
    Location
    West!!!! (Auckzorz)
    Posts
    7,025
    Blog Entries
    2
    errrrrr

    0508 4 urban???

    or try (09) 570 6101 thats apl the head office for 50/50 .....select kavin or richard kevins prob your best bet as that the main desk...ask for richards cell number if he isn't there...i can't find it right now

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •