
 Originally Posted by 
T.W.R
					
				 
				this might be worth a read 

 
			
		 
	 
 thank TWR Yup as he says read this ..( its a bit hard some writers make a simple subject hard to understand , The last page with the photos hould have been put first !!) 
Anyway ,,almost all of the suspension questions that have popped up here are answered by   Get the correct spring rate ,,,THEN  adjust the preloads to move the centre of gravity of you and the bike , to increase/decrease the loading on the front rear tyre   ( I didnt mention comp/rebound , as this really only changes a handfull of percent either side of the base damping set up - ie the shim stack - )
There is a method of calculating the spring rate which isnt that difficult needs two people , a box , some sticky backed plastic and a toilet roll 
..no wait thats tracy Island 
but you get the wieght distrubution then with a bit of simple trig , and a few beers ,,bingo you can go to national springs and order a new set for a hundred or so !!!
Stephen
				
			 
			
		 
			
				
			
				
			
			
				"Look, Madame, where we live, look how we live ... look at the life we  have...The Republic has forgotten us."
			
			
		 
	
Bookmarks