Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: Anyware to race a pocket bike in the Waikato ?

  1. #1
    Join Date
    27th April 2006 - 20:26
    Bike
    A0507 - 49cc Pocket bike - Red one :P
    Location
    Matamata
    Posts
    27

    Anyware to race a pocket bike in the Waikato ?

    Hello

    I live in Matamata and have purchased a A0507 (Cheapest chinease bike). I also have all the gear but the knee pads and albo pads. Were does one find thease items cheaply ?

    I am not sure this bike will handle racing yet :P would be fun!

    Regards
    Leyton

  2. #2
    Join Date
    29th April 2006 - 21:20
    Bike
    FZR250/CB100Bucket
    Location
    Westie
    Posts
    189
    Hi Leyton,
    Unforunatley the Hamilton kart track dont like minibikes. The best option is to find a carpark and have a blat around that.When you have enough of that come up to Mt Wgtn kart track.Im not sure about Tauranga, call the local go-kart track.
    The bikes dont need much running in before you can thrash them. Thrash em we do!!!! The motor wont blow easily but other things like engine mounts, wheel bearings, tyres, front sprockets need attention on a regular basis.
    I just wear some knee and elbow pads that they wear for skateboarding. Ive come off heaps of times and they offer good protection. GLOVES ARE GOOD TOO. When you glide across the tarmac on your stomach (most undignified it is) your palms tend to get a beating without gloves.

    Check out the nzmmrc.co.nz website. It is soley for pocketbikes.
    Enjoy your bike, ride fast and good luck!!
    Granma. Nah not in a race.

  3. #3
    Join Date
    27th April 2006 - 20:26
    Bike
    A0507 - 49cc Pocket bike - Red one :P
    Location
    Matamata
    Posts
    27
    Totaly awsum help !

    I have a Diesal wagon that uses probably $20 to Auckland and back so a trip I might have to do :P.. one concern though... It is a shame about the Hamilton track, I am sure there would be alot of people wanting to give it a go like me. I used to race modified production saloons, that got tooo enspensive, sold my tow car, trailer and a year later the racing bug has got me again! This seams an awsum cheap fix

    I noticed the rules were 750mm for the wheel base, The specs of my bike state its 950mm in lenth, I hope the wheel base is 750, it looks like it might be longer eeek....

    I bought a cheap bike ! :P, I see the D2's are super cheap!, Well.. $100 more then what I paid here but atleast the parts are garrentee'd to be avalible. I am sure I can use parts from other mini bikes on this though anyways, everything looks quite standard and if I loose an engine I am sure I can fit another one in here even if I have to weld in a new plate etc...

    I stripped this bike when I got it out of the box basicly following the advise of another poster, It paid off !! engine mount bolts were loose, exhaust bolts were loose and full of slag, normaly stuff hehe.

    Thanks heaps

  4. #4
    Join Date
    27th April 2006 - 20:26
    Bike
    A0507 - 49cc Pocket bike - Red one :P
    Location
    Matamata
    Posts
    27
    I just measured roughly, its between 700mm and 750mm but no bigger then 750mm, SWEET !

    Everything else on the bike complys.

  5. #5
    Join Date
    30th October 2005 - 20:07
    Bike
    ZPF Rep, GP3 Rep, B2 (alloy B1)
    Location
    Wellington
    Posts
    211
    Have you got protective plastic Bar-ends?
    What kind of foot pegs are on the bike?

  6. #6
    Join Date
    27th April 2006 - 20:26
    Bike
    A0507 - 49cc Pocket bike - Red one :P
    Location
    Matamata
    Posts
    27
    Nylon pegs, the ends of the bars are plastic for effect covering nylon

  7. #7
    Join Date
    30th October 2005 - 20:07
    Bike
    ZPF Rep, GP3 Rep, B2 (alloy B1)
    Location
    Wellington
    Posts
    211
    Good stuff mate, set to go.

  8. #8
    Join Date
    27th April 2006 - 20:26
    Bike
    A0507 - 49cc Pocket bike - Red one :P
    Location
    Matamata
    Posts
    27
    Sounds like it Cheers guys !

  9. #9
    Join Date
    22nd October 2002 - 11:00
    Bike
    Sold
    Location
    Coromandel Town
    Posts
    4,409
    Try contacting Tokoroa Kart Club - they might be happy to get some donations for when they're not using it.

  10. #10
    Join Date
    27th April 2006 - 20:26
    Bike
    A0507 - 49cc Pocket bike - Red one :P
    Location
    Matamata
    Posts
    27
    Humm that sounds like a plan, will have to get togeather a bunch of pocket bikers

  11. #11
    Join Date
    30th October 2005 - 20:07
    Bike
    ZPF Rep, GP3 Rep, B2 (alloy B1)
    Location
    Wellington
    Posts
    211
    I wouldn't bother contacting Toke Kart track....
    They aren't too keen on Pocketbikes....

  12. #12
    Join Date
    27th April 2006 - 20:26
    Bike
    A0507 - 49cc Pocket bike - Red one :P
    Location
    Matamata
    Posts
    27
    Seams alot of tracks are not kean, I got the wrong impression of karters the last time I hung out with a crowd of em! I might be wrong.

    I would imagin karts would do my damage to a track then a mini bike, expecialy if there was kart contact and framing broke and scored the track (would be rare I would imagine). There choice and I respect. We are lucky a few tracks are supporting this sport more and more

  13. #13
    Join Date
    30th October 2005 - 20:07
    Bike
    ZPF Rep, GP3 Rep, B2 (alloy B1)
    Location
    Wellington
    Posts
    211
    Yeah it's confirmed, we are banned from Tokoroa Kart Track, no-one seems to know why. 99% of karters are good, but there is a small number that aren't keen. Karts do damage the track, sprockets scraping etc. when they go partially on the kurb and bounce back down...

  14. #14
    Join Date
    27th April 2006 - 20:26
    Bike
    A0507 - 49cc Pocket bike - Red one :P
    Location
    Matamata
    Posts
    27
    Oh that so sucks but its there track.... Hummm I will get talkin localy to some shops I think and see what the interest is in Matamata, I wounder how it is Tauranga way, I have heard Te Puke karters dont mind pocket bikes on there track.

  15. #15
    Join Date
    13th February 2004 - 06:46
    Bike
    Forza 155 SE Pit Bike
    Location
    Wellington
    Posts
    11,471
    Hey Leyton. Not sure, but did you buy the bike off Lindsay? If so I remember ya. Good on ya for looking for somewhere to race. There's an event in Edgecumbe tomorrow if you fancy a little drive. It's the third round of the national points.

    Good luck man and I'll see you at a track soon.
    Vote David Bain for MNZ president

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •