NC30 Parts Required

**sAsLEX** · 24th June 2006, 12:57

Right list of things to fix/replace before WOF is allowed

Steering Head Bearings
Front left Brake disc
Rear Brake Disc

Anyone have a in spec disc lying around they want to part with for little dollars?

Was going to read up in the Haynes Manual on how hard these bearing would be to replace then just get them from an Engineerin Shop and do that myself, $220 for the shop to do it parts and labour inclusive! (by the way Motohaus are good to deal with! the guy their suggested doing it myself!)

**sAsLEX** · 24th June 2006, 19:30

cough bump

**sAsLEX** · 24th June 2006, 21:41

http://cgi.ebay.com/hondavfr400-nc30...QQcmdZViewItem

**dss3** · 24th June 2006, 21:42

from what i remember the steering head bearing suck, special honda sizes, can't just get them from saeco bearings of the like doh.

**sAsLEX** · 24th June 2006, 22:39

Originally Posted by dss3

from what i remember the steering head bearing suck, special honda sizes, can't just get them from saeco bearings of the like doh.

sO I will have to get them from that special "spot" oy joy!

edit: stopped in at treads on the way to uni and they couldnt help wrt to the bearings so definatly to the spot.....
they have rear discs for 200 which is what I can get them for off ebay, but fronts are going to be a bit more with 500 for one premium one or 5-600 for a pair of some other brand! but only need one!

**Mikey27** · 27th June 2006, 10:44

Originally Posted by sAsLEX

sO I will have to get them from that special "spot" oy joy!

edit: stopped in at treads on the way to uni and they couldnt help wrt to the bearings so definatly to the spot.....
they have rear discs for 200 which is what I can get them for off ebay, but fronts are going to be a bit more with 500 for one premium one or 5-600 for a pair of some other brand! but only need one!

Checked on Trademe? some cheap discs on there right now.
you are definately better off with honda bearings, you know what you're getting even if they cost a little more, just imo

**sAsLEX** · 27th June 2006, 12:31

Originally Posted by Mikey27

Checked on Trademe? some cheap discs on there right now.
you are definately better off with honda bearings, you know what you're getting even if they cost a little more, just imo

Any links?

Bearing kits are $ 115 from the spot, and they have a front disc for 350 as well, just need to find a garage and a hand to help remove and replace the bearings

**sAsLEX** · 27th June 2006, 17:18

http://www.trademe.co.nz/Browse/List...px?id=61055393

mttuer 20 mm too small according to k14 mutter

but who was looking for MC22 parts as these are pretty good value!

**sAsLEX** · 27th June 2006, 21:49

anyone else confirm the above?

**Sketchy_Racer** · 27th June 2006, 22:12

How bout these?

a bit more pricey than the other - but atleast you know they will fit....

\

http://www.trademe.co.nz/Trade-Me-Mo...n-61414777.htm

**sAsLEX** · 27th June 2006, 22:19

Originally Posted by RG100!!

How bout these?

a bit more pricey than the other - but atleast you know they will fit....

\

http://www.trademe.co.nz/Trade-Me-Mo...n-61414777.htm

As they did not come up in any of the searches i did!

**sAsLEX** · 28th June 2006, 15:41

Got the parts today! cept for the rear disc, $465 for front disc and bearing kit from the spot and good service as well!

see http://www.kiwibiker.co.nz/forums/sh...858#post664858

**dss3** · 28th June 2006, 15:43

Originally Posted by sAsLEX

Got the parts today! cept for the rear disc, $465 for front disc and bearing kit from the spot and good service as well!

see http://www.kiwibiker.co.nz/forums/sh...858#post664858

Oh crap, did you say you needed a front disc? I have a set of near new front discs you could have had for a box of dubbo's, they are no use to me...

;-)

**sAsLEX** · 28th June 2006, 15:47

Originally Posted by dss3

Oh crap, did you say you needed a front disc? I have a set of near new front discs you could have had for a box of dubbo's, they are no use to me...

;-)

Mate you have impeccable timing!

A mean an hour ago!