plastic fabricator/welder here if you need a hand ! will work for beer/bourbon/booze
come ride the southern roads www.southernrider.co.nz
Fitted a DB killer today. Bike runs better. More low down. Hmmmm
Also fitted riser blocks on the bars, much better for me old wrists. And got a cable lube tool and did my clutch cable, shit its heaps lighter to use.
Doing a 700k ride on Sunday.![]()
you can get these to raise ur current rearsetshttp://www.ebay.co.uk/itm/Arretrator...vip=true&rt=nc
plastic fabricator/welder here if you need a hand ! will work for beer/bourbon/booze
come ride the southern roads www.southernrider.co.nz
I made mine lighter yesterday. I rode it thus reducing rubber and fuel weight. I did not notice the difference though .......
My new seat cover arrived from Poland last week, alas it appears the sewing machine ran out of thread on one of the seams ......
A e-mail to the seller with photos very quickly sorted it out and a new one is one it's way already. Provided it arrives (and is OK) that's a good Ebay seller story.
The seller wanted a photo of the back of the cover as it has writing on it denoting who made it and presumably who quality checked it - he confirmed the latter was missed off in this instance. It does concern me that I may have either had some poor Polish person fired or even shot for f-ing up the first effort!
I'm also going to throw on the new pair of T30's sitting in my shed. The Conti RA2's are near the last 1000 and starting to handle oddly - the rear has squared off a bit and the front triangle up on the edge sections. You can feel the 'roll' over the back and then the dive in the front!!!!!!
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks