Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: Windshield/Windscreen restoration

  1. #1
    Join Date
    27th October 2005 - 08:47
    Bike
    1992 Honda CB400SF
    Location
    Titirangi
    Posts
    101

    Windshield/Windscreen restoration

    Hi all

    I've munted the inside of my bike windscreen by accidently (and stupidly) spraying petrol over it.

    Now before I attempt to find a replacement I was wondering if anybody may have any suggestions to how I MIGHT be able to clean it up a little to at least make it look slightly better that it does at the moment!

    Cheers

  2. #2
    Join Date
    1st September 2004 - 12:38
    Bike
    Ducati M750/ MotoFXR
    Location
    Christchurch
    Posts
    2,448
    Mine came up pretty good after a polish with Turtle wax "Extreme Cleaner Wax".
    My daughter telling me like it is:
    "There is an old man in your face daddy!"

  3. #3
    Join Date
    16th October 2004 - 14:46
    Bike
    2007 ZX6R Racebike
    Location
    Howick, Auckland
    Posts
    745

    Meguiars PlastX

    Did something similar. Try the PlastX its a clear plastic polisher with some micro-fine abrasives. Available at Repco and other similar automotive stores

  4. #4
    Join Date
    16th October 2005 - 19:41
    Bike
    XR1200x, Triumph Speed Four
    Location
    Taupo
    Posts
    685
    My business partner used to have to restore jet fighter canopies to mint condition when he was in the Airforce. I think he used various grades of superfine (around 3000 grit) wet and dry. Will check with him in the morning and post his advice.
    "Twilight's like soccer. They run around for two hours, nobody scores, and a billion fans insist you just don't understand"

  5. #5
    Join Date
    27th October 2005 - 08:47
    Bike
    1992 Honda CB400SF
    Location
    Titirangi
    Posts
    101
    Thanks all for all your help and replies, much appreciated!

  6. #6
    Join Date
    16th October 2005 - 19:41
    Bike
    XR1200x, Triumph Speed Four
    Location
    Taupo
    Posts
    685
    Spoke to my business partner today - the method used in the Airforce was lengthy and required a special kit with wet and dry ranging from 1000 to 10,000 grit!!! and a special polish. It also took a long time to get a perfect finish. His suggestion for minor damage is toothpaste (it's a very fine abrasive) and then poilshing up the whole screen with Pledge. Worth a try.... cheap anyway if it works!
    "Twilight's like soccer. They run around for two hours, nobody scores, and a billion fans insist you just don't understand"

  7. #7
    Join Date
    27th October 2005 - 08:47
    Bike
    1992 Honda CB400SF
    Location
    Titirangi
    Posts
    101
    Quote Originally Posted by trumpy
    Spoke to my business partner today - the method used in the Airforce was lengthy and required a special kit with wet and dry ranging from 1000 to 10,000 grit!!! and a special polish. It also took a long time to get a perfect finish. His suggestion for minor damage is toothpaste (it's a very fine abrasive) and then poilshing up the whole screen with Pledge. Worth a try.... cheap anyway if it works!
    Appreciate your help on this, thanks a lot! Will try to fix anyway

  8. #8
    Join Date
    1st February 2005 - 22:01
    Bike
    GSX-R750, CBR400RR
    Location
    PN
    Posts
    33
    Mequires PlastX is the way to go. I used it and find that even a "tainted" wind screen will clear away and looks like new. Awesome product.

  9. #9
    Join Date
    27th October 2005 - 08:47
    Bike
    1992 Honda CB400SF
    Location
    Titirangi
    Posts
    101
    Quote Originally Posted by TCT
    Mequires PlastX is the way to go. I used it and find that even a "tainted" wind screen will clear away and looks like new. Awesome product.
    Cool, I think I'll give that stuff a bash.

    I quickly tried some toothpaste this morning on the windscreen and it worked surprisingly well.

    We try the PlastX stuff as my windshield is pretty tainted because of the spilt petrol

  10. #10
    Join Date
    13th January 2004 - 11:00
    Bike
    Honda PC800
    Location
    Henderson -auckland
    Posts
    14,163
    on badly fogged headlights I use a fine cutting compound -cut/polish
    To see a life newly created.To watch it grow and prosper. Isn't that the greatest gift a human being can be given?

  11. #11
    Join Date
    6th May 2006 - 10:40
    Bike
    Aprillia RSV 1000 mille
    Location
    Wellington
    Posts
    58

    Blah You wont believe this but........

    BRASSO - I kid you not........
    Try a little in a top corner and see - my screen was foggy as shit - original screen on a 89 bike and got told if you clean with brasso it would come up clear again.
    It did - dont know how it would work on todays screens - but you never know.
    Use it and buff it while still damp I was told - dont let it dry.

    Might help

  12. #12
    Join Date
    27th October 2005 - 08:47
    Bike
    1992 Honda CB400SF
    Location
    Titirangi
    Posts
    101
    Quote Originally Posted by Hotchefnz
    BRASSO - I kid you not........
    Try a little in a top corner and see - my screen was foggy as shit - original screen on a 89 bike and got told if you clean with brasso it would come up clear again.
    It did - dont know how it would work on todays screens - but you never know.
    Use it and buff it while still damp I was told - dont let it dry.

    Might help
    Cheers for that, will remember that one too!

  13. #13
    Join Date
    31st March 2003 - 13:09
    Bike
    CBR1000RR
    Location
    Koomeeeooo
    Posts
    5,559
    Blog Entries
    9
    Try Armoral... does a bloody god job of hiding scratches etc but I'm not sure how it'll affect things you're facing.
    $2,000 cash if you find a buyer for my house, kumeuhouseforsale@straightshooters.co.nz for details

  14. #14
    Join Date
    1st February 2005 - 22:01
    Bike
    GSX-R750, CBR400RR
    Location
    PN
    Posts
    33
    By the way, Mequires PlastX is also very good for the plastic lenses - indicators and the like.

  15. #15
    Join Date
    27th October 2005 - 08:47
    Bike
    1992 Honda CB400SF
    Location
    Titirangi
    Posts
    101
    Quote Originally Posted by TCT
    By the way, Mequires PlastX is also very good for the plastic lenses - indicators and the like.
    I will head down to Repco at the weekend and try the PlasticX stuff as a few people have recommended it.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •