Missing at low revs

[lb99]

The Kawasaki parts listing quotes the following:

Carburettor # 16001-1028 /-1068 (Z200 models A1/A2)
Carburettor # 16001-1027 (Z200 models A1A/A2)

Needle # 16009-1005 , use for 16001-1028 /-1068
Needle # 16009-1025 , use for 16001-1027

Main Jet # 92063-1009 (#105) std in 16001-1028 /-1068
Main Jet # 92063-1114 (#110) std in 16001-1027
Main Jet # 92063-1008 (#100) race use only ( )
Main Jet # 92063-1118 (#115) race use only ( )
Main Jet # 92063-1011 (#120) race use only ( )

Pilot Jet # 92064-1002 (#38)

Those numbers are Kawasaki parts listing so if you quote those they should be able to supply them or at least source them.

Not sure on the float height setting sorry, something tells me it's close to 13mm +/- 2mm either way. I'll see if i can dig anything up.

Wow, you really know your stuff

The local Kawasaki outfit have never really been that helpful, if its not on the shelf then they dont seem to want to know, anyway the place that will try for unusual spares came up with a no longer available for the needle.

But I think I sorted it anyway, the idle mixture circuit was a bit blocked, to the point where you could remove the mixture screw alltogether, and there would be no difference in the running, a bit of compressed air soon fixed that, combined with a tank of 98 she seems all sweet now.

[lb99]

Diagnose correctly before you start thowing parts at it,if you get it wrong you'll disguise the real problem and make it harder for yourself....or the poor bastard who has to sort it out for you.

due to a lifetime of being a poor underprivliged scrounger, I avoid buying parts at all costs, likewise labour

[Motu]

You've got a long way to go before you get to be as cheap as me - so get the problem nailed before you even think of parts.