Page 1 of 3 123 LastLast
Results 1 to 15 of 33

Thread: Essentials for my Garage

  1. #1
    Join Date
    4th April 2004 - 15:05
    Bike
    97 CRM 250 AR
    Location
    Christchurch
    Posts
    1,662

    Essentials for my Garage

    As I've almost got my baby in my greasy hands.

    Now it's time to think about all the things I'll need if my hands are to get greasy. As my "tool box" consists of a hammer and a screwdriver. No not even in a tool box.

    Here's my list so far. Would appreciate additions including where from and how much.

    Essentials.
    Torque wrench?
    Spanner set.
    Allen key set.
    Sissor jack (not really essential as I can use a crate in the meantime but would make things easier.
    Tie downs.
    Some sort of punture repair kit?
    Cleaning stuff (not sure what everyone uses but I know there has been a couple of threads on the issue so will do a search and update).
    Hayden - Evidence that even the mediocre can achieve great things.

    ((U+C+I) x (10-S))/20 x A x 1/(1-sin(F/10))

  2. #2
    Join Date
    29th October 2005 - 16:12
    Bike
    Had a 2007 Suzuki C50T Boulevard
    Location
    Orewa
    Posts
    5,852
    PM me if you like. I sell tools. Various brands and pricing to suit any purpose.
    You don't get to be an old dog without learning a few tricks.
    Shorai Powersports batteries are very trick!

  3. #3
    Join Date
    20th November 2002 - 03:11
    Bike
    Registered. For now...
    Location
    Tauranga
    Posts
    1,627
    A mechanic friend gave me a bit of advice many years ago, and it has served me well, so I shall pass it on...

    Buy tools as you need them, and buy the best quality that you can reasonably afford at the time.

    This means you don't waste money on tools you will never use, and the tools you buy should be fit for the job (nothing like having a cheap ratchet explode in your hand while you are giving a stuck fastener the berries!). The only time to buy cheap stuff is when it is for a one-off job; no point in spending big money on something you will never use again.

    A scissors jack is always a handy thing to own. Go to your local car dump and get one for free.
    ACC - It's where the Enron accountants all went.

  4. #4
    Join Date
    8th November 2004 - 11:00
    Bike
    GSXR 750 the wanton hussy
    Location
    Not in Napier now
    Posts
    12,765
    You mention a spanner set....ensure you get ring and open end. Probably just metric will do.
    You will also need a good selection of sockets...get 1/2" drive with adaptors for 1/4" and 1/3"
    A selection of screwdrivers too....straight and philips. Get at least one with a magnetic tip.
    Pliers and the related wire-stripper and crimp tool. Don't forget about circlip pliers of both types.
    By the time you get all requirements, you'll be ....oooohhh....about 50
    Do you realise how many holes there could be if people would just take the time to take the dirt out of them?

  5. #5
    Join Date
    5th April 2005 - 12:57
    Bike
    In between bikes
    Location
    Earth
    Posts
    799
    Buy tools as you need them or break them That's what I've done.

    I'd say owning the following would be enough keep you handy and dangerous at the same time.

    • Socket set
    • Spanner set
    • Pliers
    • Allen keys
    • Assortment of screw drivers - straight & philips
    • Hammer
    • Sissor jack (usually located in boot of your car)
    • Collection of rags
    • Sparkplug socket bits


    Those 100 piece sets are quite good as a starting point, they'll give you a bit of everything.

    A tool collection will take decades to grow into something useful. Take your time, it'll get there.
    90% of the time spent writing this post was spent thinking of something witty to say. It may have been wasted.

  6. #6
    Join Date
    4th April 2004 - 15:05
    Bike
    97 CRM 250 AR
    Location
    Christchurch
    Posts
    1,662
    Yeah I figure it's one of those things that that never ends, with the majority of bits being "ooo I need".

    Just trying to get an idea of the most common essentials, so I can maybe start picking up a piece here and there.

    Going to
    Hayden - Evidence that even the mediocre can achieve great things.

    ((U+C+I) x (10-S))/20 x A x 1/(1-sin(F/10))

  7. #7
    Join Date
    4th April 2004 - 15:05
    Bike
    97 CRM 250 AR
    Location
    Christchurch
    Posts
    1,662
    Yeah I figured it was one of those long term things with the majority of items being aquired as needed.

    More just trying to get an idea of everyone elses common essentials so I can start looking at aquiring pieces here and there as the CFO allows.
    Hayden - Evidence that even the mediocre can achieve great things.

    ((U+C+I) x (10-S))/20 x A x 1/(1-sin(F/10))

  8. #8
    Join Date
    12th August 2004 - 09:31
    Bike
    2013 EX300SE
    Location
    Top of the Gorge
    Posts
    1,511
    You need a heater and some sort of pad to kneel on - or perhaps I'm just getting old.

  9. #9
    Join Date
    19th November 2003 - 18:45
    Bike
    KTM 690 DUKE R
    Location
    Auckland - unavoidably...
    Posts
    6,422
    Quote Originally Posted by Pwalo
    You need a heater and some sort of pad to kneel on - or perhaps I'm just getting old.
    I dont have a garage and do my work under a car port out side at night with an old headlight connected to an old battery at light, in short yes you are old

  10. #10
    Join Date
    28th August 2005 - 19:37
    Bike
    MT09 Tracer
    Location
    New Plymouth Taranaki
    Posts
    1,552

    What a tool

    Quote Originally Posted by MSTRS
    You mention a spanner set....ensure you get ring and open end. Probably just metric will do.
    You will also need a good selection of sockets...get 1/2" drive with adaptors for 1/4" and 1/3"
    A selection of screwdrivers too....straight and philips. Get at least one with a magnetic tip.
    Pliers and the related wire-stripper and crimp tool. Don't forget about circlip pliers of both types.
    By the time you get all requirements, you'll be ....oooohhh....about 50
    I must find myself one of those 1/3" socket sets (pt)
    Suck, Squeeze, Bang, Blow aren’t just the 4 cycles of an engine

  11. #11
    Join Date
    31st March 2003 - 13:09
    Bike
    CBR1000RR
    Location
    Koomeeeooo
    Posts
    5,559
    Blog Entries
    9
    PM Swanman and get a rear bike stand.

    Brilliant for any work on the back wheel, lubing the chain etc
    $2,000 cash if you find a buyer for my house, kumeuhouseforsale@straightshooters.co.nz for details

  12. #12
    Join Date
    12th August 2004 - 09:31
    Bike
    2013 EX300SE
    Location
    Top of the Gorge
    Posts
    1,511
    Quote Originally Posted by sAsLEX
    I dont have a garage and do my work under a car port out side at night with an old headlight connected to an old battery at light, in short yes you are old
    Yep, so do I, and that's why I'd like a heater. And a radio. And a small fridge. And ..................

  13. #13
    Join Date
    10th May 2006 - 10:37
    Bike
    Aprilia RSV Mille & Aprilia Tuono 660
    Location
    Torbay, North Shore, Akld
    Posts
    529
    ......a supermodel in a bikini to pass the tools to me as I need them......

  14. #14
    Join Date
    12th September 2003 - 12:00
    Bike
    Katana 750, VOR 450 Enduro
    Location
    Wallaceville, Upper Hutt
    Posts
    5,521
    Blog Entries
    26
    You all forgot the rubber mallet. Essential tool.

    An air compressor and some basic tools are handy too. I use mine so much its not funny.

    Also some stainless steel bowls for holding and washing parts are bloody handy too.

    An oil filter wrench and a small crank puller could be added when needed.

    Also long nose pliers, and a can of CRC or WD-40, and a brake bleeding kit.
    And I to my motorcycle parked like the soul of the junkyard. Restored, a bicycle fleshed with power, and tore off. Up Highway 106 continually drunk on the wind in my mouth. Wringing the handlebar for speed, wild to be wreckage forever.

    - James Dickey, Cherrylog Road.

  15. #15
    Join Date
    3rd September 2005 - 08:19
    Bike
    .
    Location
    .
    Posts
    3,712
    beer fridge?

    hard work requires refreshments.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •