Results 1 to 7 of 7

Thread: yzf1000 thunderace diagnosing problem. help!!

  1. #1
    Join Date
    13th February 2006 - 13:46
    Bike
    1996 yzf1000 YAMAHA
    Location
    MAKETU
    Posts
    1

    yzf1000 thunderace diagnosing problem. help!!

    Starts fine everytime, but runs as if its only on three cylinders, problem was only on and off, now its all the time, rev counter is o.k then it just goes up to 7000rpm, for afew secs then turns off for afew secs, then back to norm & repeats this over & over. I take it this is a code of some sort for diagnosing, I have replaced sparkplugs & no change, if anyone knows anything or can help be much appreciated, last resort take it to the shop. cheers...

  2. #2
    Join Date
    21st July 2005 - 12:00
    Bike
    92 Yamaha FJ1430A
    Location
    Nana Republic
    Posts
    2,543
    Blog Entries
    23
    Quote Originally Posted by Alzkapowz View Post
    Starts fine everytime, but runs as if its only on three cylinders, problem was only on and off, now its all the time, rev counter is o.k then it just goes up to 7000rpm, for afew secs then turns off for afew secs, then back to norm & repeats this over & over. I take it this is a code of some sort for diagnosing, I have replaced sparkplugs & no change, if anyone knows anything or can help be much appreciated, last resort take it to the shop. cheers...


    that sounds like it may be an issue with the coil packs or CDI.. Dynatek makes a killer replacement .. i have a pair of DC3's on my FJ and it REALLY wakes it up.. i think AMPS can source them
    Life is tough. It's tougher when you're stupid

    SARGE
    represented by GCM

  3. #3
    Join Date
    15th February 2006 - 15:25
    Bike
    Orange ones! (and a few others...)
    Location
    Auckland
    Posts
    2,970
    Wot Sarge says.....probably?
    Before you buy stuff get it diagnosed, you can ask a shop to just do the diagnosis rather than everything but electrical stuff is hard / expensive to fix by the replace everything theory.

    I am really crap with electrics so could easily be wrong here!

    Good luck.....

  4. #4
    Join Date
    21st July 2005 - 12:00
    Bike
    92 Yamaha FJ1430A
    Location
    Nana Republic
    Posts
    2,543
    Blog Entries
    23
    Quote Originally Posted by Crisis management View Post
    Wot Sarge says.....probably?
    Before you buy stuff get it diagnosed, you can ask a shop to just do the diagnosis rather than everything but electrical stuff is hard / expensive to fix by the replace everything theory.

    I am really crap with electrics so could easily be wrong here!

    Good luck.....
    the big yammies like those and the FJ's have that problem as a feature.. the coil packs are placed at an area of high heat and they do go south after a while ..thats why i swapped mine out.. i had a very similar issue with the FJ..


    but get it checked out for sure .. remove the coil packs and take them to someone that can run tests on them.. try and find a working ' Ace CDI you can swap out for a few k's and give that a go..
    Life is tough. It's tougher when you're stupid

    SARGE
    represented by GCM

  5. #5
    The tacho is triggered by the CDI out put to one cyl,or two if it has waste spark (double ended coil) so it's most likely the same cyl going out.Next step is to diagnose what the problem is....or just throw parts at it.
    In and out of jobs, running free
    Waging war with society

  6. #6
    Join Date
    21st July 2005 - 12:00
    Bike
    92 Yamaha FJ1430A
    Location
    Nana Republic
    Posts
    2,543
    Blog Entries
    23
    Quote Originally Posted by Motu View Post
    ..or just throw parts at it.
    thats the reason the FJ cant run on pump gas anymore
    Life is tough. It's tougher when you're stupid

    SARGE
    represented by GCM

  7. #7
    Join Date
    25th March 2004 - 17:22
    Bike
    RZ496/Street 765RS/GasGas/ etc etc
    Location
    Wellington. . ok the hutt
    Posts
    21,305
    Blog Entries
    2
    Do a search here on 'Tacho Tango' for ideas. Often a grounding problem.

    Oh yeah, welcome to the brotherhood [everyone else avert your eyes]
    http://exupbrotherhood1.com/phpbb2/index.php
    Don't you look at my accountant.
    He's the only one I've got.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •