Pit stands

**FROSTY:Me** · 25th July 2004, 12:12

Originally Posted by ching_ching

Hi XJ/Frosty,

Still got some of those stands? Looking at a universal rear... would the stand be interchangeable with bobbin fittings for my bike than able to change back to universal for other bikes without bobbin fittings?

Come back

ching_ching

sorry ching ching -missed ya post
The answer is yes-no problems -uiniversal and bobbin
I usually supply em with the universal fitting .The bobbin fitting is a bit extra.

**ching_ching** · 26th July 2004, 21:22

Originally Posted by XJ/FROSTY

sorry ching ching -missed ya post
The answer is yes-no problems -uiniversal and bobbin
I usually supply em with the universal fitting .The bobbin fitting is a bit extra.

I like the idea of the bar you can push through to help prevent roll off.

Do you have any in your shed or do you have to bring em in?

Are they still $140- for the universal rear? Just biding my time till I have just enough pings saved.

ching_ching

**FROSTY:Me** · 8th February 2005, 22:34

Guys N gals --These stands are still available -anybody interested feel free to contace me

**Cajun** · 9th February 2005, 06:38

price for a front please. does he do one that goes in to the bottom of the triple clamp sorta thing

**FROSTY:Me** · 9th February 2005, 07:30

Ill se if I can organise some pictures for ya

**Blakamin** · 9th February 2005, 09:11

A Pic of a rear would be cool tooo....

**Quasievil** · 9th February 2005, 09:16

Hey XJ, I will need a rear please how much for a new budding young (older) racer wannabe.
Will it be okay for a gixer 400 ?

**bugjuice** · 9th February 2005, 09:59

are the front ones holding the bike up by the bottom of the forks or the type that holds up by the steering head? How much are they for the front?

Also, I have a back stand, but it's a generic 'L' bracket one. Anyone know anyone who could help me weld a 'U' shape on instead so I can pick the back up with pins? The 'L' is good for most bikes, but it gets in the way of the rear bolt. Or swap for one that's already done, but I can't see that happening really..

**Paul in NZ** · 9th February 2005, 10:36

How much for one to suit a crusty old T140 racer?

Paul N

**FROSTY:Me** · 9th February 2005, 10:39

Guys I have in my gargre 2 types of front stand. the centre of asteering head type and the end of fork leg type. I have rear stands for single sidede swingarm biked--nc30 etc and standard swingarm types.
The normal type rear stands have as an optional extra a swingarm bobbin kit and V type lifters for specific bikes.
The standard rear stand packs away flat when not in use,is adjustable to suit most bikes and the handle acts as a locking device to stop roll off when ya getting rough -maybee like pulling an engine out.
all reall good kit

**bugjuice** · 9th February 2005, 11:05

how much for the folding rear and the steering head type stands?
Might just sell the one I have now and get those two off ya. Might pop round for a look if thats ok..