Results 1 to 3 of 3

Thread: Aprilia rs250 revving out after crash

  1. #1
    Join Date
    16th December 2005 - 18:54
    Bike
    2000 aprilia rs250.
    Location
    North Shore Auckland
    Posts
    523

    Aprilia rs250 revving out after crash

    I am having trouble with the engine, the bike was still turned on when I picked it up but would not come on when I turned the ignition on when I got home, I left it and this morning changed the fuse which has fixed it.
    The bike kicks over no problems however it is revving out to about 6000 rpm and holding there, you can take it down to about 2000rpm (just above idle) by bringing on the choke and then taking it back off, It will then sit at that rpm for a while before revving out to 6000 again where you can do the choke again, any ideas ?
    I thought it might have something to do with the choke as that handle bar was twisted well forward and might have stretched the choke but Ive moved it back and its still doing it, HELP APPRECIATED!!!
    Confident the aprilia rsv4, IS the one

  2. #2
    Join Date
    13th April 2005 - 12:00
    Bike
    Enfield cr250r
    Location
    Tokyo
    Posts
    3,429
    Blog Entries
    4
    Airleak...is my gues , if by using the choke it stops it revving ..
    check around the carbs with ( well I use brake clean , the engine note will change when injested

    Stephen
    "Look, Madame, where we live, look how we live ... look at the life we have...The Republic has forgotten us."

  3. #3
    Join Date
    16th December 2005 - 18:54
    Bike
    2000 aprilia rs250.
    Location
    North Shore Auckland
    Posts
    523

    shot

    Under the tank I found the carb cable to be stretched out of place, put it back in and she purrs now
    Confident the aprilia rsv4, IS the one

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •