Page 1 of 2 12 LastLast
Results 1 to 15 of 22

Thread: MC19 and MC22 - what are the differences?

  1. #1
    Join Date
    5th March 2007 - 18:08
    Bike
    Gone
    Location
    AKLD
    Posts
    2,154

    MC19 and MC22 - what are the differences?

    I'm not THAT interested in figures from a website or such, I want to hear from people who've owned them.

    The most obvious differences that stick out between a MC19 and MC22 is that the MC19 has one brake disc, and no side stand switch. Other than that are they the same? Or any 'behind the scenes' changes (suspension, swingarm, frame etc)

    TIA

  2. #2
    Join Date
    25th March 2009 - 14:29
    Bike
    2008 Suzuki GSXR-750
    Location
    Glen Eden, Auckland
    Posts
    524
    Quote Originally Posted by breakaway View Post
    I'm not THAT interested in figures from a website or such, I want to hear from people who've owned them.

    The most obvious differences that stick out between a MC19 and MC22 is that the MC19 has one brake disc, and no side stand switch. Other than that are they the same? Or any 'behind the scenes' changes (suspension, swingarm, frame etc)

    TIA
    The 19 has a single front disk, three spoke wheels, horizontal air "intakes" and a box section swingarm.
    The 22 has twin disk brakes, 5 spoke wheels, vertical air "intakes" and a banana shaped swingarm.
    Also i believe the 22 has a different frame and also a sportier seating position.

  3. #3
    Join Date
    13th December 2008 - 18:22
    Bike
    Your mom
    Location
    Christchurch
    Posts
    3,901
    The MC19s have a fuel pump and the MC22 doesn't.

  4. #4
    Join Date
    25th March 2009 - 14:29
    Bike
    2008 Suzuki GSXR-750
    Location
    Glen Eden, Auckland
    Posts
    524
    Quote Originally Posted by SMOKEU View Post
    The MC19s have a fuel pump and the MC22 doesn't.
    also I have heard MC19 fuel pumps fuck out a lot... have yet to experience it though

  5. #5
    Join Date
    5th March 2007 - 18:08
    Bike
    Gone
    Location
    AKLD
    Posts
    2,154
    And any areas to look at (i.e. areas of common failure) before purchasing a MC19 / 22?

    Right now I'm looking at 2:

    - A 90 MC19, looks tidy, original paintjob, travelled around 30,000km, $2600
    - A 94 MC22, a bit rough (matt black paintjob), travelled around 30,000 km also, $2500

    Just thinking about which one to get! Leaning towards the one with the standard paintjob though.

  6. #6
    Join Date
    3rd October 2004 - 17:35
    Posts
    6,390
    I have a full performance exhaust for sale for the mc22.


    the mc22 is a way better bike, better brakes, better frames, better susspension and lighter
    Then I could get a Kb Tshirt, move to Timaru and become a full time crossdressing faggot

  7. #7
    Join Date
    28th September 2004 - 23:00
    Bike
    1992 VFR400R, 2007 SV650 Pro Twin
    Location
    Auckland
    Posts
    1,349

  8. #8
    Join Date
    5th March 2007 - 18:08
    Bike
    Gone
    Location
    AKLD
    Posts
    2,154
    Ah yeah I see. Looks like a lot of people reckon the MC22 is better. However this bike is for the mrs, and she isn't exactly going to be putting her knee down on every corner.

    Another thing to consider is the super dodgy paintjob on the MC22. It looked pretty rough! Lets face it, no one paints a bike matt black for shits and giggles. If they do, they'll do a good job of it, not a piss poor job. All these things point to the bike being not maintained properly. But I checked everything, and it felt great to ride and the engine sounds spot on. So I'm just wondering if there's anything else to consider on this MC22.

  9. #9
    Join Date
    28th September 2004 - 23:00
    Bike
    1992 VFR400R, 2007 SV650 Pro Twin
    Location
    Auckland
    Posts
    1,349
    Have a look at the colour of the oil. If it's clear, means it's had at least one recent oil change. Often an indication of it's treatment over it's lifetime. Just because someone has painted it matt black doesn't mean that it hasn't mechanically been looked after.

    Any mc22 with over 20,000k's will most likely have been dropped. They crash awesome though, rarely get badly damaged.

    Don't go for the single R... get the double, and then you can use it for fun too. If you tidy it up (cost for fairings and paint just over a grand) it will be worth close to $5000.

  10. #10
    Join Date
    5th March 2007 - 18:08
    Bike
    Gone
    Location
    AKLD
    Posts
    2,154
    Where would one go to get a quote for a paintjob? Isn't there some guy on KB that does them at a very reasonable price?

  11. #11
    Join Date
    28th September 2004 - 23:00
    Bike
    1992 VFR400R, 2007 SV650 Pro Twin
    Location
    Auckland
    Posts
    1,349
    I think Frenchy, Nicksta's lad does paintjobs.

  12. #12
    Join Date
    13th December 2008 - 18:22
    Bike
    Your mom
    Location
    Christchurch
    Posts
    3,901
    Quote Originally Posted by Scotty595 View Post
    also I have heard MC19 fuel pumps fuck out a lot... have yet to experience it though
    The fuel pump on my MC19 fucked out when the bike had only done around 23,000km. Honda quoted me over $300 for a new one; fuck that I said. I got a new $140 one for a Mini instead, just had to cut a few hoses and it fitted without any dramas.

  13. #13
    Join Date
    27th May 2009 - 22:52
    Bike
    2002 CBR954 FIREBLADE
    Location
    Papakura
    Posts
    116
    Blog Entries
    1
    Checkout ebay in australia - heaps of full fairing kits prepainted and stickered available.

    http://cgi.ebay.com.au/HONDA-cbr250-...item3a55f09b10

  14. #14
    Join Date
    5th March 2007 - 18:08
    Bike
    Gone
    Location
    AKLD
    Posts
    2,154
    Yeah I saw that - I rang reflections earlier today and they quoted between $1800 and $2100 to get it done, and that's just for doing a gloss black job (decals extra).

    Addict - do you know anyone who has purchased those fairing kits? I'm real keen to buy that, but the quality of some chinese product is questionable at best (the 'item location' is somewhere in China).

    Also the yoshimura exhaust - is it legit? Lots of fakes around I hear.

  15. #15
    Join Date
    29th September 2003 - 20:48
    Bike
    2008 DRZ400E & 1983 CB152T
    Location
    Alexandra
    Posts
    4,158
    Definately not a yoshi pipe, leave the standard exhaust on. I had a MC22 and bought an aftermarket exhaust for it. I was 20km from home on my way to Auckland (from New Plymouth) and I turned around to go back and put the standard exhaust on. Even though I was wearing earplugs the noise was just rediculous. At 110 they are doing around 10k rpm and it is just a horrendous racket.

    IMO the MC22 is a far superior bike but if the MC19 is in better condition mechanically and cosmetically they it is probably the better buy.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •