U need to play more COD5 bro
-Indy
Shotgun (single, double, pump, lever, bolt)
Shotgun Auto (non MSSA)
Rifle (single, double, pump, lever, bolt)
Rifle Auto (non MSSA)
MSSA
Pistol
Black powder (rifle, pistol, shotgun)
Air/Gas (pistol, rifle)
un-armed
The Sharif don't like it!
U need to play more COD5 bro
-Indy
Hey, kids! Captain Hero here with Getting Laid Tip 213 - The Backrub Buddy!
Find a chick who’s just been dumped and comfort her by massaging her shoulders, and soon, she’ll be massaging your prostate.
Kiwi back at home!
[QUOTE=Mr Merde;1129220207]
Its already illegal to use lead bullets in the PRK. (Peoples Republic of Kalifornia).
[QUOTE]
Who needs lead?
http://www.predatorprojectiles.com.au/
Was thinking 100 odd 38-40 for the odd plinking session with it. Will get some reloading gear in the near future but cant afford a setup for the .308 and the pistol round.
Mallicious Little Gnome
[QUOTE=sAsLEX;1129222488][QUOTE=Mr Merde;1129220207]
Its already illegal to use lead bullets in the PRK. (Peoples Republic of Kalifornia).
Who needs lead?
http://www.predatorprojectiles.com.au/
Was thinking 100 odd 38-40 for the odd plinking session with it. Will get some reloading gear in the near future but cant afford a setup for the .308 and the pistol round.
Love the bullets. My mates up north turn out their bullets, for a Boyes .55 anti tank rifle, on a lathe and made from solid brass
I'll ask about the 38-40. See whats around.
Chris
"When you think of it,
Lifes a bowl of ....MERDE"
Still Ridin'
When Depleted Uranium can get the job done with so much more flair...Originally Posted by sAsLEX
Motorbike Camping for the win!
Mallicious Little Gnome
Usede to buy that stuff in the late 80's.
23 UK pounds per shot.
"When you think of it,
Lifes a bowl of ....MERDE"
Still Ridin'
What the fuck were you shooting at that required DU rounds? Did the deer thereabouts travel by APC?
Motorbike Camping for the win!
Mallicious Little Gnome
No we were on an army range in Caldicot, South Wales.
It backed on to the Servern Estuary.
We were shooting targets at 600 yards with my mate Andy's single shot .50 BMG.
We only bought 4 rounds as 100 UKP wasa a shit load of money for us.
We only realised later that if we had of missed , that on the other side of the Severn was the nuclear powerstation and it was well withing range of a .50BMG.
Hate to think what would have happened if a DU round had hit this installation.
"When you think of it,
Lifes a bowl of ....MERDE"
The 2nd-most bad arse KBer.
well here goes round 2.
got the rifle back, couldn't find a problem (its misfiring), reattach the scope and go to sight it in.
sure enough after about 15 shots i get a misfire.
Took it back in, and sure enough they cant find a fault. I bitched at them for a bit and now they are sending it to a 3rd gunsmith.
Bet ya 100 bucks he wont find a problem, i asked the store man to tell the gunsmith to check headspace and he says he only is allowed to tell the gunsmith the problem (i.e., misfiring) and that no one in New Zealand has a headspace gauge and if it was headspace it'd be doing it on every round. not just every now and again.
i dunno what to do? send it back to america?
Then I could get a Kb Tshirt, move to Timaru and become a full time crossdressing faggot
Still Ridin'
"Containment Breach"
Motorbike Camping for the win!
Mallicious Little Gnome
Check your ammo for proud primers.
Check the firing pin spring
Check the firing pin for protrusion (too far)
How does it missfire?
When closing the bolt?
How is the bolt moved into position ?
Is it a caming movement?
Does it use gearing?
Both could be loose or miss aligned
Contact the manufacturers via the internet and ask their advice
"When you think of it,
Lifes a bowl of ....MERDE"
The 2nd-most bad arse KBer.
hows your health atm chirs? i'll bring it around if you want to have a look (and a shoot if it shoots haha) when i get it back.
yeah i'll be contacting marlin after i give the gun shop one more go. (3 times lucky)
What do you mean proud primers? when the hammer hits the primer if the dent sits a bit proud?
Then I could get a Kb Tshirt, move to Timaru and become a full time crossdressing faggot
Mallicious Little Gnome
Proud primers are exactly what they soun]d like.
Primers that are sitting proud of the base of the case before they are fired.
Shouldnt be a case with factory ammo but who knows. narrows down the field a bit.
Are there any particular circumstances when the missfire occurs.
I take it its when you close the lever and the bolt goes forward.
Check that the firing pin isnt hanging up in the bolt. No burrs etc
"When you think of it,
Lifes a bowl of ....MERDE"
The 2nd-most bad arse KBer.
I really want to take the bolt apart, but the dickhead (is his name richard or something?) at SS said i'll break it, which i find hard to belive so i gave it a go, but couldn't seem to figure it out
Its part 15 i cant get off. (is it the extractor?)
Then I could get a Kb Tshirt, move to Timaru and become a full time crossdressing faggot
Mallicious Little Gnome
I really want to take the bolt apart, but the dickhead (is his name richard or something?) at SS said i'll break it, which i find hard to belive so i gave it a go, but couldn't seem to figure it out
Its part 15 i cant get off. (is it the extractor?)
What dont you understand?
Check for dirt in the bolt. Check the firing pin for burrs
Check the hole that the firing pin protudes from after being struck. Look for a burr
You cant break it and yes Richard is a dickhead
Chris
"When you think of it,
Lifes a bowl of ....MERDE"
The 2nd-most bad arse KBer.
part 15 that comes off part 2. i put alot of force trying to take it off, it looks like its just pressed on and should simply pop off? or do i need to take number 23 off first? are they just pins or screws?
Then I could get a Kb Tshirt, move to Timaru and become a full time crossdressing faggot
There are currently 5 users browsing this thread. (0 members and 5 guests)
Posting Permissions
Reply With Quote
Bookmarks