Page 1 of 2 12 LastLast
Results 1 to 15 of 19

Thread: Wireless router

  1. #1
    Join Date
    3rd October 2004 - 17:35
    Posts
    6,390

    Wireless router

    Gidday

    My old man is wanting to put his adsl on a wireless network (so you can connect any where in the house) what hardwhere do we need? and can you plz give some good reviews etc


    I imagne he would need an wireless router.... adsl plugs into that and that sends it around the house and to the neighbours.


    Also if somone could tell me how to stop other people using our wireless network it would be cool.
    Then I could get a Kb Tshirt, move to Timaru and become a full time crossdressing faggot

  2. #2
    Join Date
    30th January 2004 - 18:42
    Bike
    08ZX10, 98 KX250
    Location
    Palmerston North
    Posts
    181
    No doubt you'll get the run down from all the tech guys here... I got one from telecum run it with the laptop, had no problems makes the very slow internet fun around the house with no cable's just like i'm doing now in front of the tv.

    Best thing we ever did. good luck with the set up info
    Quote Originally Posted by scracha View Post
    Dude, I was riding it home from Hamilton in the pi$$ing rain $hitting myself .... There's no way in hell I could own that bike for a week and still have my license. There...I've admitted it.

    Scracha Loves me ... Know him before you judge me.

  3. #3
    Join Date
    31st March 2005 - 02:18
    Bike
    CB919, 1090R, R1200GSA
    Location
    East Aucks
    Posts
    10,499
    Blog Entries
    140
    http://www.pbtech.co.nz/index.php?item=MODDYN1025W

    we use that for our home clients, not very gui configs, but I hate those (the ones that come free with new connections). set up 128bit wep, SSID, passphrase, config on all clients accessing, and you should be away laughing...

    before doing any of this, make sure you have the dsl account name and password, to enter into new router. Once its completely set up, if you don't need any more clients (computers) accessing, then you can turn off the broadcast of the SSID, to make it that little bit more secure.
    Quote Originally Posted by Jane Omorogbe from UK MSN on the KTM990SM
    It's barking mad and if it doesn't turn you into a complete loon within half an hour of cocking a leg over the lofty 875mm seat height, I'll eat my Arai.

  4. #4
    Join Date
    7th July 2005 - 12:00
    Bike
    .
    Location
    .
    Posts
    2,460
    Basic setup

    Wireless router
    pcmcia card or pci card for laptop / pc respectively (if they're not already inbuilt)

    That's it for kit. In terms of security, WPA security, it'll have instructions with the router on how to set this up for your specific kit. Opinions are divided, but I'll usually buy all one brand, i.e. Belkin for both the wireless router and the pcmcia cards...

  5. #5
    Join Date
    20th February 2005 - 07:04
    Bike
    2010 Thruxton & 2013 Think Ion
    Location
    Tawa
    Posts
    1,180
    Blog Entries
    1
    Don't buy D-Link.

    Heaps of them are having random signal drop problems.

  6. #6
    Join Date
    8th January 2005 - 21:11
    Bike
    Goldwing GL1800
    Location
    Beachlands
    Posts
    105
    i have a netgear, laptop had a wireless connection built into it, so just required the wireless router, you create a security code, which you will need to write down and stash somewhere that security key becomes the only way to acess your router and get to the internet, i have a spare wirless ADSL router if you wanna take it for a spin and if you like it you cna purchase it, if not return it , le me know
    putt putt

  7. #7
    Join Date
    27th March 2006 - 10:29
    Bike
    KTM 1190 Adv R and a bunch of dirties
    Location
    Burglary capital of Unzud
    Posts
    2,879
    If you already have an adsl modem, then you can get a wireless access point / WAP, preferably with inbuilt ethernet switch say 4 ports.

    If you don't, then get a combo modem WAP.

    Check out www.pricespy.co.nz for prices.

    For PCs get PCI cards and for laptops (if not already inbuilt PCMCIA cards)

    To stop others using your network all waps have security features. WEP, WPA and Mac fitlers are the most common. Basicaly they restrict who can connect and encrypt the signals.
    Quote Originally Posted by Albert
    Two things are infinite: the universe and human stupidity; and I'm not sure about the universe

  8. #8
    Join Date
    18th October 2005 - 16:47
    Bike
    Bandit 250(for sale), 636
    Location
    Wellington
    Posts
    1,954
    Quote Originally Posted by Dafe View Post
    Don't buy D-Link.

    Heaps of them are having random signal drop problems.
    um, really?? the one stonechucker gave me goes fine?!
    1990 Suzuki Bandit GSF 250 for sale 39k kms $3,500

  9. #9
    Join Date
    1st April 2006 - 14:32
    Bike
    ex rider
    Location
    Around the next corner
    Posts
    196
    When setting up the access points have them authenticate by MAC address.
    WPA is good but implementing MAC filtering adds that litle bit more security to your network.

    Open wireless networks are just aching for someone to use.

    Most new laptops have wireless built in. If you are setting up a PC then you will need a wireless card for each.

    Wireless is pretty good but walls do interfere with the signal. As do microwave ovens (same bandwidth range), watch out for bluetooth devices as they again use the same bandwidth.

    Been running wireless networks for 6 years now. It has been fun watching the advances in technology.

  10. #10
    Join Date
    31st March 2005 - 02:18
    Bike
    CB919, 1090R, R1200GSA
    Location
    East Aucks
    Posts
    10,499
    Blog Entries
    140
    Quote Originally Posted by Dai View Post
    Wireless is pretty good but walls do interfere with the signal. As do microwave ovens (same bandwidth range), watch out for bluetooth devices as they again use the same bandwidth.
    Some cordless phones can also operate on the same band, 2.48xx something or other...

    D-Link and Netgear are normally ones to avoid, then it comes down to specific models, some items are made by someone else, then rebranded.

    Another thing you should probably consider is how much hands on admin of the network you want, stuff like logging, port re-direction, control of ports etc. If you do want advanced stuff like that, then check, as obviously the low end stuff well... its at the bottom for a reason.
    Quote Originally Posted by Jane Omorogbe from UK MSN on the KTM990SM
    It's barking mad and if it doesn't turn you into a complete loon within half an hour of cocking a leg over the lofty 875mm seat height, I'll eat my Arai.

  11. #11
    Join Date
    24th September 2006 - 02:00
    Bike
    -
    Location
    -
    Posts
    4,736
    Quote Originally Posted by Wasp View Post
    um, really?? the one stonechucker gave me goes fine?!
    Yeah... I've a D-Link router too, most of the time it's good, but from time to time it'll toast itself when it's really heavily loaded for a long period. Then again, most other models are fine, and I have heard of the odd absolutely useless router, but usually these types of things are fixable via firmware updates. For hassle-free routing (no wireless experience with them, though), go Linksys.

    I still think the best routers around are the Microsoft routers (don't think they're made any more) -- which sounds odd coming from a Linux user, but MS have always tended to make quite nice hardware (mouses, keyboards etc.). Strange that for a software company, their software is shit and their hardware is great? Do they outsource their hardware?

  12. #12
    Join Date
    18th October 2005 - 16:47
    Bike
    Bandit 250(for sale), 636
    Location
    Wellington
    Posts
    1,954
    yea... but seriously the only problems i've had with it is when the adsl is dropped but thats telescums fault not its and its one of the best routers at reconnecting ive ever had
    1990 Suzuki Bandit GSF 250 for sale 39k kms $3,500

  13. #13
    Join Date
    3rd October 2004 - 17:35
    Posts
    6,390
    Quote Originally Posted by Gremlin View Post
    http://www.pbtech.co.nz/index.php?item=MODDYN1025W

    we use that for our home clients, not very gui configs, but I hate those (the ones that come free with new connections). set up 128bit wep, SSID, passphrase, config on all clients accessing, and you should be away laughing...

    before doing any of this, make sure you have the dsl account name and password, to enter into new router. Once its completely set up, if you don't need any more clients (computers) accessing, then you can turn off the broadcast of the SSID, to make it that little bit more secure.
    Thanks for your (and everyones) input mate.

    The link you gave here, does that have the adsl modem in it? (not a wireless internet modem...)

    That link looks awesome becuase it says I can connect other computers with cable as well as having wireless (only the laptop needs wireless at this stage).
    Then I could get a Kb Tshirt, move to Timaru and become a full time crossdressing faggot

  14. #14
    Join Date
    26th July 2006 - 16:28
    Bike
    BLANK
    Location
    Upper Hutt
    Posts
    373
    I use one of these at home http://www.ascent.co.nz/productspeci...?ItemID=113527
    Im currently on Telstra so my Cable feeds direct to the wireless router then i link it out to a network switch also, runs laptop wireless and rest of hte house on cables.
    When i was on Telecom i had the phone line into the telecom provided router and then the network cable from wireless router to the telecom router, this gave me the same result as i have now.
    Linksys decent brand and have had no issues with mine. I use WPA and pre shared key option to secure but i also leave the SSID advertised so that any new pcs into my house can detect then i can provide the key.
    We use the same Linksys Router at work and have had no problems there either.

  15. #15
    Join Date
    3rd July 2003 - 12:00
    Bike
    Scorpio, XL1200N
    Location
    forests of azure
    Posts
    9,398
    Linksys gear is made by Cisco and is top-notch. Works a treat every time.

    D-Link is horrid shite with firmware written in China. If you don't know what that implies, then just trust me and don't buy anything with that brand on it. Their combo routers/wireless APs just don't work properly. I kid you not.

    I recommend Netgear. A bit cheaper than Linksys, but just as reliable.

    The OP needs a Netgear DG834G (combo ADSL modem, firewall, four-port Ethernet switch and 802.11b/g AP). Noel Leeming have them on sale for $100 at the moment. I've used one myself for the last 4 years without a single problem, and know at least four other guys who use the same model for their home network.
    kiwibiker is full of love, an disrespect.
    - mikey

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •