Custom decals

**fallofalot** · 7th March 2007, 14:07

I might be able to help, I have a cutter. Just setting it up at home. To do bike graphics. Be set up and ready in about a week or so PM me, call evenings 09 8384020 or shelracing@slinghot.co.nz.

**Bangbug** · 7th March 2007, 14:30

Originally Posted by wildpudding

Craig at Attract Promotions (attract.promotions@gmail.com ) did the stickies on my bike for me. I downloaded a trial version of Coral Draw off the old net and came up with them myself(typical student tightarse approach).

Came out real good, and he gave me a great deal too, so thumbs up from me.

Stefan

Brings a tear to me salty old eye.

Thanks wildpudding

**The Lone Rider** · 23rd March 2007, 23:25

Originally Posted by fallofalot

I might be able to help, I have a cutter. Just setting it up at home. To do bike graphics. Be set up and ready in about a week or so PM me, call evenings 09 8384020 or shelracing@slinghot.co.nz.

Are you still able to do graphics for people? I am after some chrome flame decals for my bike, but they have to be of a certain measurement to cover up the logo on my bike that is underneath the finish of the tank. I can provide pictures and measurements

Edit-
After having a rather shitty time trying to apply graphics and in the end scrapping the whole thing and throwing them away, I decided I hate graphics.

**Bangbug** · 23rd April 2007, 12:08

Originally Posted by dyers

Are you still able to do graphics for people? I am after some chrome flame decals for my bike, but they have to be of a certain measurement to cover up the logo on my bike that is underneath the finish of the tank. I can provide pictures and measurements

Edit-
After having a rather shitty time trying to apply graphics and in the end scrapping the whole thing and throwing them away, I decided I hate graphics.

Poor Dyers

Chrome doesn't comply very well/at fucking all.
Comply? Go around curves, etc.
That mite have been your downfall.
I hope u were told beforehand

Better luck next time.

Toodles squeezedlemoninacoffeecupupsideyourfacelikeafleaat itsmarket

**The Lone Rider** · 23rd April 2007, 23:49

I had problems with adhesive on the top side of the decals for starter. You could rub it off with soap water but you had to rub fucking hard and then it ended up on my tank. After more rubbing it, most came off but so did some of the decal edges.

The other problem I had was simply getting it on without it creasing. It was when one ended up with a giant creased line through it I chucked it all out.

**SHELRACING** · 25th April 2007, 20:08

Originally Posted by dyers

Are you still able to do graphics for people? I am after some chrome flame decals for my bike, but they have to be of a certain measurement to cover up the logo on my bike that is underneath the finish of the tank. I can provide pictures and measurements

Edit-
After having a rather shitty time trying to apply graphics and in the end scrapping the whole thing and throwing them away, I decided I hate graphics.

Hi Dyers,

Just read about your issues with the graphic's.
We did advise you that chrome was exceptionally difficult to handle and didnt like bending around curves.

After reading your demise we would like to offer you the same graphic, at no charge, but in Silver metalic. This material is a more flexible and you should find it easier to work with.

Please PM us if you would like to take up the offer.

Steve and Ellen

**Toaster** · 25th April 2007, 20:19

Yikes Indy, you will need a serious do over on the bike to look like that mate! Would look cool though.

**The Lone Rider** · 25th April 2007, 20:58

Originally Posted by SHELRACING

Hi Dyers,

Just read about your issues with the graphic's.
We did advise you that chrome was exceptionally difficult to handle and didnt like bending around curves.

After reading your demise we would like to offer you the same graphic, at no charge, but in Silver metalic. This material is a more flexible and you should find it easier to work with.

Please PM us if you would like to take up the offer.

Steve and Ellen

My frustration is no reflection of the work or quality. I simply couldn't get a clean job done on them and it fucked me off to no end.

What does the silver metallic look like?

**flash** · 26th April 2007, 18:52

i dont know if its vinyl ild want to use but i badly want a precut racing sticker package for my huski, anyone know if thers any anywhere?, ive been seaching on google for days

**fallofalot** · 26th April 2007, 21:51

Dyers.

Silver colour with a gentle metalic sparkle. Just look at any silver car, or something like Suzukis SV1000.

Cheers
Steve

**Indiana_Jones** · 26th April 2007, 22:26

Originally Posted by Toaster

Yikes Indy, you will need a serious do over on the bike to look like that mate! Would look cool though.

Have you seen my designs for it in the other threads in this sub forum? lol

-Indy

**Toaster** · 26th April 2007, 22:45

Originally Posted by Indiana_Jones

Have you seen my designs for it in the other threads in this sub forum? lol

-Indy

Not yet dude, but I will get there!

**The Lone Rider** · 26th April 2007, 23:31

Originally Posted by flash

i dont know if its vinyl ild want to use but i badly want a precut racing sticker package for my huski, anyone know if thers any anywhere?, ive been seaching on google for days

Ask falloffalot, as he designed and made mine

Silver colour with a gentle metalic sparkle. Just look at any silver car, or something like Suzukis SV1000.

So it's like this one? http://www.suzuki-bikes.com/images/sv1000s.jpg