120 on a 1.40 rim. Too big?

**Spyke** · 24th March 2007, 09:04

I have bought a bucket racer a little while ago and it came with a 120/90 by 18 tyre on the back and its sitting on a 1.40 rim. Is this to big? to me it looks to big, If so what size should i put on.

Will this width affect my cornering.

also if anyone knows where to get a cheap tyre thats the right size drop in a pm please.

**F5 Dave** · 26th March 2007, 17:09

Hahahaha.

nooo way jose!

ideally a 3.5" for 120

Can cram a 90 onto a 1.6, but isn't ideal.

Must have pictures. Sterling effort!

**Spyke** · 26th March 2007, 18:22

got a few photos.

on the rim it says 18 by 1.40 but is that right, i measured the outside of the rim and it is about 55 mm which is 2.2 inches. but where do they measure the rim from?

i think i should get another tyre for it.

**xwhatsit** · 26th March 2007, 23:19

Whoah! Coolest bucket ever!

That is all.

**F5 Dave** · 27th March 2007, 09:27

Looks like a balloon! Nice.

The 1.4 is measured from the bead, ie where the tyre seats. It is a skinny rim, but so be it. A 3" tyre (~ 80) is about what you should be running.

**Spyke** · 27th March 2007, 17:51

thanks for the info, i did think it looked like a balloon.
ill have to try and find a resonable tyre.

**Spyke** · 27th March 2007, 17:58

Originally Posted by xerxesdaphat

Whoah! Coolest bucket ever!

That is all.

thanks
tis a nice bike but the someone put a 185 carb on her and shes runnig a bit rough, we did change the main jet because it was to big, but its still runnig rough

**xwhatsit** · 27th March 2007, 22:26

Originally Posted by wana_b_rider

thanks
tis a nice bike but the someone put a 185 carb on her and shes runnig a bit rough, we did change the main jet because it was to big, but its still runnig rough

What's all the tin for, if you don't mind me asking?

**TygerTung** · 28th March 2007, 02:07

Is that a CB or a CG?

**Spyke** · 28th March 2007, 16:38

Originally Posted by TygerTung

Is that a CB or a CG?

its ct125e

the guy before me did some extensive work on her because if im right thats a dirt bike frame.

**Spyke** · 28th March 2007, 16:41

Originally Posted by xerxesdaphat

What's all the tin for, if you don't mind me asking?

the tin is on there i think mainly to stop your foot or gear getting caught in the wheel so that you can tuck your legs in to the bike more, plus it makes it look better.

Q- are you customising your cb250 to make it look like a cafe' racer?

because if you are that is what i really want to do too when i get a road bike!

**xwhatsit** · 28th March 2007, 22:37

Originally Posted by wana_b_rider

the tin is on there i think mainly to stop your foot or gear getting caught in the wheel so that you can tuck your legs in to the bike more, plus it makes it look better.

Q- are you customising your cb250 to make it look like a cafe' racer?

because if you are that is what i really want to do too when i get a road bike!

Ah I see. I suppose with the rear-set pegs, you are dangerously close to the drive linkage ^_^.

Yep, haha. It's going to be an on-going project, it has to be done inexpensively. I'm taking notes from Motu on how to draw a project out as long as possible

. Cool! The more customised bikes on the road, the better as far as I'm concerned. Cookie-cut bikes are kind of impersonal in my humble opinion, unless of course they are concourse original-style bikes.

**Spyke** · 29th March 2007, 07:25

Originally Posted by xerxesdaphat

Ah I see. I suppose with the rear-set pegs, you are dangerously close to the drive linkage ^_^.

Yep, haha. It's going to be an on-going project, it has to be done inexpensively. I'm taking notes from Motu on how to draw a project out as long as possible

. Cool! The more customised bikes on the road, the better as far as I'm concerned. Cookie-cut bikes are kind of impersonal in my humble opinion, unless of course they are concourse original-style bikes.

yea the legs would be in a pretty dangerous spot, i can just imagen myself getting caught up in the wheel or something.

i just love seeing custom bikes, they just stick out from the rest. i personally love the style of the cafe' racer styled bike.

**Buddha#81:Me** · 29th March 2007, 21:54

Some of the bucket guys run a Ching Shin skinny down here (dont know what model) but they seem to work ok and are under $50 per tyre. They're a 90/90-18ish. Dunlop do a TT900 in a skinny 18" but $130 or more.

**Spyke** · 30th March 2007, 07:13

Originally Posted by spud racer

Some of the bucket guys run a Ching Shin skinny down here (dont know what model) but they seem to work ok and are under $50 per tyre. They're a 90/90-18ish. Dunlop do a TT900 in a skinny 18" but $130 or more.

thanks for the info will have to see if i can get them up here.