Results 1 to 12 of 12

Thread: Wanted to buy

  1. #1
    Join Date
    23rd November 2003 - 20:12
    Bike
    R80, CB400N, Cb200.
    Location
    Northcote, Auckland
    Posts
    1,398

    Wanted to buy

    Last thread wasn't getting too much attention so...
    I need a 250cc 4 stoke, preferably 4 cylinders, definately not one.
    FZR, GSX, GSXR or something along those lines. Age not a big concern, preferably kms under 50k.
    Around the 2 grand mark.

  2. #2
    Join Date
    12th February 2004 - 12:00
    Bike
    08 ZX-6R Race Bike, FXR150
    Location
    Auckland
    Posts
    4,913
    For that kind of dollars, keep your eyes peeled in the trade and exhange.... look for bikes in the 2000-2750 range and talk them down
    See Robert Taylor for any Ohlins requirements www.northwest.co.nz
    Thanks Colemans Suzuki
    Thanks AMCC
    I use DID Chains and Akrapovic Exhausts

  3. #3
    Join Date
    23rd November 2003 - 20:12
    Bike
    R80, CB400N, Cb200.
    Location
    Northcote, Auckland
    Posts
    1,398
    I've got a ZXR250 coming down from Kaitaia, developed a strange engine noise but runs fine. So we will see what the check says .
    Last edited by Magua; 26th August 2004 at 21:21. Reason: More crap spelling

  4. #4
    Join Date
    12th February 2004 - 12:00
    Bike
    08 ZX-6R Race Bike, FXR150
    Location
    Auckland
    Posts
    4,913
    Quote Originally Posted by Magua
    I've got a ZXR250 coming down from Kaitaia, developed a strange engine noise but runs fine. So we will see what the check says .
    sounds like the cam chain tensioner.......
    See Robert Taylor for any Ohlins requirements www.northwest.co.nz
    Thanks Colemans Suzuki
    Thanks AMCC
    I use DID Chains and Akrapovic Exhausts

  5. #5
    Join Date
    23rd November 2003 - 20:12
    Bike
    R80, CB400N, Cb200.
    Location
    Northcote, Auckland
    Posts
    1,398
    Is that easy to fix?

  6. #6
    Join Date
    13th January 2004 - 11:00
    Bike
    Honda PC800
    Location
    Henderson -auckland
    Posts
    14,163
    camchain is an easy job -tentioner is a bit harder but not too bad
    To see a life newly created.To watch it grow and prosper. Isn't that the greatest gift a human being can be given?

  7. #7
    Join Date
    15th February 2003 - 10:49
    Bike
    Tyre Shredder
    Location
    In my own mind
    Posts
    3,869
    as i said somewhere else if you get a mechanic to do it. If it has the tensioner kit it will cist like approx $75 for labour to do it if it doesn't have the kit you will need to add about $82 on top of that.

  8. #8
    Join Date
    23rd November 2003 - 20:12
    Bike
    R80, CB400N, Cb200.
    Location
    Northcote, Auckland
    Posts
    1,398
    How much do you think it would cost for someone to find out where this rattle is coming from?

  9. #9
    Join Date
    15th February 2003 - 10:49
    Bike
    Tyre Shredder
    Location
    In my own mind
    Posts
    3,869
    Well the guys at Mt eden are pretty good. I go in and they have a listen and they picked the cam chain rattle up right away. If they can hear what is wrong they will tell you or charge you about $60 an hour to find out. Most bike shops are like that.

  10. #10
    Join Date
    25th August 2004 - 21:45
    Bike
    GSXR 450
    Location
    NZ
    Posts
    2,618
    Which place in Mt eden?
    Only a man who knows what it is like to be defeated can reach down to the bottom of his soul and come up with the extra ounce of power it takes to win when the match is even.
    Muhammad Ali

  11. #11
    Join Date
    23rd November 2003 - 20:12
    Bike
    R80, CB400N, Cb200.
    Location
    Northcote, Auckland
    Posts
    1,398
    I think he means "Mt Eden Motorcycles".

  12. #12
    Join Date
    23rd November 2003 - 20:12
    Bike
    R80, CB400N, Cb200.
    Location
    Northcote, Auckland
    Posts
    1,398
    ZXR didn't eventuate, still open to offers.
    Quote Originally Posted by John Banks View Post
    Yes, but bikes = cool and cars = suck. I think it's Newton's fourth law or something.
    Quote Originally Posted by The_Dover View Post
    Queer Retarded Fags I think.

    Isn't sniper one of those?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •