Results 1 to 10 of 10

Thread: Replacement mercury for vacuum gauges...

  1. #1
    Join Date
    13th September 2005 - 18:20
    Bike
    Crashed it.
    Location
    Auckland
    Posts
    2,043

    Replacement mercury for vacuum gauges...

    Anyone know where to get it?

    I rang Motomail and they told me there's an import ban. There's nothing on any Customs import restrictions that I can see about a ban, so I presume they're just talking shit because that's the easy option. They probably think they'll sell a set of dial gauges hahaha

    It's not for me so don't ask where the mercury they came with went. I honestly have no idea how you could lose it.
    If it wasn't for a concise set of rules, we might have to resort to common sense!

  2. #2
    Join Date
    19th July 2005 - 20:17
    Bike
    95' CBR900
    Location
    Sunnynook
    Posts
    368
    Just had a quick google, nothing here in NZ leaps out.
    Perhaps you can try contacting the science dept of your local High School or University and asking them.
    vagrant

  3. #3
    Join Date
    9th October 2003 - 11:00
    Bike
    2022 BMW RnineT Pure
    Location
    yes
    Posts
    14,591
    Blog Entries
    3
    There was a mercury export ban mooted in June this year.

    http://www.zeromercury.org/EU_develo...Export_ban.pdf

    I don't think it is in effect yet though, nor am I convinced that it will actually happen.
    If a man is alone in the woods and there isn't a woke Hollywood around to call him racist, is he still white?



  4. #4
    Join Date
    19th October 2005 - 20:32
    Bike
    M109R, GS1200ss, RMX450Z, ZX-12R
    Location
    Near a river
    Posts
    4,308
    The mercury ban is happening

    We tried to get a new mercury manometer at work and were told that none were being brought in including mercury refill for existing units

    So we've gone whole hog and brought a electronic management/diagnostic unit

  5. #5
    Join Date
    13th September 2005 - 18:20
    Bike
    Crashed it.
    Location
    Auckland
    Posts
    2,043
    Might just have to buy half a dozen of these...
    If it wasn't for a concise set of rules, we might have to resort to common sense!

  6. #6
    Join Date
    6th October 2005 - 21:45
    Bike
    none for now
    Location
    tauranga
    Posts
    581
    I guess you could break open some mercury tilt switches but you'd want to be real careful about handling the stuff.

  7. #7
    Join Date
    24th July 2006 - 11:53
    Bike
    KTM 1290 SAR
    Location
    Wgtn
    Posts
    5,541
    Go talk to some of the local industrial electrical contractors. Some older heavy duty switches contain murcury and when they replace them they're supposed to collect and dispose of it in the approved manner. They shouldn't give you any but you might convince them to bypass their legal obligations if you can come up with a good pitch.
    Go soothingly on the grease mud, as there lurks the skid demon

  8. #8
    Join Date
    3rd February 2004 - 08:11
    Bike
    2021 Street Triple RS, 2008 KLR650
    Location
    Wallaceville, Upper hutt
    Posts
    5,225
    Blog Entries
    5
    Quote Originally Posted by slopster View Post
    I guess you could break open some mercury tilt switches but you'd want to be real careful about handling the stuff.
    My dad was an electrician way back when. He did industrial motor controls which used mercury in tilt type switches (for a power on delay thing I think)
    Anyway there was a small bottle of mercury (a Stevens ink bottle IIRC) in our kitchen cupboard. As kids, on occasions we would get a little blob of the stuff out to roll around on our hands. Inevitably some got dropped and went into the floorboard cracks. We also played on that same floor, ate in that room, etc. There was also a grandfather clock that had a couple of tubes of mercury on the pendulum (weight compensation?) and they got spilled while one of us was hiding in the bottom of the clock. Picked up as much as we could using a piece of paper and brushed the rest (with bare hands) into the cracks or the clock cabinet.
    So far everything *seems* to be normal about us, no instances of Minamata in us or our kids or their kids. Musta got lucky...
    it's not a bad thing till you throw a KLR into the mix.
    those cheap ass bitches can do anything with ductape.
    (PostalDave on ADVrider)

  9. #9
    Join Date
    24th July 2006 - 11:53
    Bike
    KTM 1290 SAR
    Location
    Wgtn
    Posts
    5,541
    Quote Originally Posted by slopster View Post
    I guess you could break open some mercury tilt switches but you'd want to be real careful about handling the stuff.
    The actual metal ain't that dangerous, it's the oxides and salts that'll do some damage.

    http://www.corrosion-doctors.org/Ele...mad-hatter.htm

    Be carefull anyway huh?
    Go soothingly on the grease mud, as there lurks the skid demon

  10. #10
    Join Date
    13th June 2006 - 09:37
    Bike
    Honda CX500 "Shithawk"
    Location
    Dunedin
    Posts
    1,907
    Quote Originally Posted by awful-truth View Post
    Anyone know where to get it?
    Delta Electrical in Dunedin ( I think it was Delta... anyway my mum's boyfriend worked there) and they had about 20 litres of Mercury in a steel bucket / vat / container. They had collected it from various places as Ocean1 said above. I guess they were collecting it until they had enough to sell or something.
    Determined to kill my bike before it kills me

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •