Results 1 to 8 of 8

Thread: Honda bit wanted regulator/rectifier

  1. #1
    Join Date
    17th September 2007 - 14:32
    Bike
    1999HondaCBR1100XX
    Location
    Nelson
    Posts
    2

    Honda bit wanted regulator/rectifier

    Hi People,
    Anyone know where I can get a regulator/rectifier for a 1998/99 Honda CBR1100XX the part id number is SH638-12 and its got 7.N underneath.
    Cheers....Darryl

  2. #2
    Join Date
    5th December 2006 - 18:22
    Bike
    2000 Honda CBR600F4, RG50/GL145 Bucket
    Location
    Whitby, Wellington
    Posts
    2,009

    '99-'01 CBR600 Seat

    Hey Daryl, I don't have a rectifier but your thread is a good catch-all, can I piggyback on it and list the bit that I want please?

    I would like a standard 600F4 or 4i seat to try out. Any condition is ok, even just the pan.

  3. #3
    Join Date
    30th March 2004 - 11:00
    Bike
    2001 RC46
    Location
    Norfshaw
    Posts
    10,455
    Blog Entries
    17
    Quote Originally Posted by Daz1203 View Post
    Hi People,
    Anyone know where I can get a regulator/rectifier for a 1998/99 Honda CBR1100XX the part id number is SH638-12 and its got 7.N underneath.
    Cheers....Darryl
    Most bike dealers should be able to get one for you - that number indicates it's a Shindengen R/R. Shindengen make them for Honda, Ducati and some other manufacturers. I dunno who imports them, but I bought one from Spoectrum and the second one from Mt Eden M/C, who both got them from Eurobike or whoever the importer is.
    If you buy a "genuine" Honda one, they WON'T give you a warranty on it, it will cost twice as much, and it'll just be a Shindengen one anyway, as Honda don't make them.
    ... and that's what I think.

    Or summat.


    Or maybe not...

    Dunno really....


  4. #4
    Join Date
    22nd October 2002 - 11:00
    Bike
    Sold
    Location
    Coromandel Town
    Posts
    4,420
    Quote Originally Posted by Daz1203 View Post
    Hi People,
    Anyone know where I can get a regulator/rectifier for a 1998/99 Honda CBR1100XX the part id number is SH638-12 and its got 7.N underneath.
    Cheers....Darryl
    Hi Darryl. Reg/recs for the earlier Blackbirds were known to fail on occasions (as you've just found out I suspect). The problems were fixed post 2002 and a lot of people swap to the later reg/rec as a precautionary move.

    Send a message to JAWS (John Smith) in the UK. He specialises in Blackbird parts and his service is legendary throught the Blackbird-owning world. I've bought heaps of aftermarket stuff from him. Usually takes a week to get here. His website is: www.jaws-motorcycles.co.uk/. BTW, some people use Yamaha R1 reg/recs as a replacement. If you want to know where the good Blackbird websites are, just send me a PM.

    Cheers,

    Geoff

  5. #5
    Join Date
    14th February 2006 - 08:20
    Bike
    Like Dani Pedrosa's RC211V now!
    Location
    Auckland
    Posts
    1,961
    I bought one for my Fireblade from Ebay and paid 1/3 the price including postage compared to what Honda NZ was charging. Was told by a bike shop best to go for aftermarket rectifier as the pre-2000 CBR 600,900,1100 OEM rectifier were notorious for failing (bad design).
    Don't just live to ride but ride to live.

  6. #6
    Join Date
    14th February 2006 - 08:20
    Bike
    Like Dani Pedrosa's RC211V now!
    Location
    Auckland
    Posts
    1,961
    Quote Originally Posted by Grub View Post
    I would like a standard 600F4 or 4i seat to try out. Any condition is ok, even just the pan.
    Try this bike wrecker on trademe.

    http://www.trademe.co.nz/Trade-Me-Mo...-118025769.htm

    He even has a wrecked F4i double seat models
    Don't just live to ride but ride to live.

  7. #7
    Join Date
    27th December 2006 - 17:17
    Bike
    1991 Yamaha FJ1200
    Location
    Tauranga
    Posts
    515
    EconoHonda may be able to help.

  8. #8
    Join Date
    17th September 2007 - 14:32
    Bike
    1999HondaCBR1100XX
    Location
    Nelson
    Posts
    2
    Cheers for that info also found a wrecker in Ngaruawahia (Bikebusters)who has a contact in Aus that can get them for 1/3 price

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •